Get matched with top roofers in Keytesville, MO

You can put new shingles over old shingles, but most municipalities only allow for two layers of shingles before you have to rip off the old roof and start fresh. In some areas, only a single layer of shingles is allowed due to the weight a bundle of shingles adds to your structure. In most cases, it’s a good idea to remove your old shingles before you install new shingles, especially if you suspect that a roof leak may have compromised the decking underneath.

Copper roofs last an average of around 100 years, making it one of the longest-lasting types of roofs. It’s significantly more expensive than an asphalt shingle roof, but it also lasts three to four times as long, providing great value for the money. You can extend the life of your copper roof by carrying out routine maintenance, like scheduling annual cleaning and roof inspections.

No, you can’t use your home’s square footage. You have to calculate your roof’s square footage, and then you may have to convert your square footage measurement to correspond with how the roofing material is measured. For instance, some roofing is sold in “squares,” which equals the total square footage of the roof divided by 100. Shingles are sold in bundles that may not correspond to the number of squares you need. Metal roofing is sold as sheets, so determine the amount of square feet each panel will cover and then divide the total square footage by the coverage area.

Furring strips (also called wood stripping) are not always necessary for a metal roof installation, but they are highly recommended and may be required by local building codes or the roofing manufacturer's specifications. There are several key reasons to use them:

• Energy Efficiency: Furring strips, made of wood or metal, create an air gap between the metal panels and the roof deck. This acts as a thermal break, reducing heat transfer into your home and improving overall energy efficiency.

• Moisture and Condensation Control: The air gap allows for better airflow, which helps prevent moisture buildup and condensation under the metal panels.

• Structural Support: They provide a solid, even frame to which you can attach the metal roofing panels.

It is especially important to use furring strips when installing a metal roof over existing shingles. Without them, the roof surface can be uneven, and you will experience greater solar heat gain.