I'm Ausencio. I run Royalty Rehab Construction here in Kansas City. I handle drywall, paint, flooring, tile, roofing repairs, decks, fencing, and general home repairs. I'm fully insured and believe in honest communication, quality work, and fair pricing. If you ever need a hand or advice on a project, feel free to reach out
My name is Armando, and I’m committed to providing dependable, high-quality handyman services you can trust. Whether you need home repairs, maintenance, remodeling, drywall repairs, painting, fixture installation, or general home improvement projects, I take pride in delivering quality workmanship with attention to detail.
Bathtub & Tile Restoration Rather than replacing your countertop, bathtub we are a cost effective way to update an old or damaged surface. Your kitchen or bathroom will be done in a few hours and will be backed by a 5-year warranty! We specialize in Countertop Resurfacing, Bathtub Reglazing and Shower Refinishing.
"We signed contract on 4/15/2013 and were told by salesman that jobs were approximately 4 to 6 weeks out. The night we signed the contract, ask for a floor sample to be sent to me so I could pick out counter top and paint. The salesman also said that this product would never mold or mildew, especially the joints, because their product was formulated for heavy moisture areas. (Later found out that is NOT true, from another customer. Salesman also stated that we wouldn't probably hear anything for a couple of weeks, then we would get a phone call to set everything up. By May 15, I had repeated tried to contact salesman, via phone and email as to why no one had contacted me to set up install and why flooring sample was not sent. Salesman never returned any phone calls and then only via email did I receive any response. Each time with an excuse as to why nothing was happening. FINALLY received flooring sample (a index card size on June 3rd), followed by a phone call on June 5th, from someone at the Rebath office asking if they could come do the tear out on June 7th, with drywall repair on the 8th and install on the 10th and 11th. I stated it was a little short notice and was told if I didn't take that date then it would possible be another 3 to 4 weeks out. So wanting to get the bath done--since they had half of my money (3,600.00), I along with my husband agreed. When I arrived home on the 7th, from work, which was around 2:30. It was a fairly hot day---the front door to my home was standing open. No one was going in or out and the tear out guy was in bathroom, with very little work done. Because of the soffit work--we ask him to save the insulation so it could be placed back into attic, he did so. Tear out man was in home till late in the evening--not something you want to happen due to most people have to work the next day. He kept leaving front door open, all the while the air conditioner was running to keep up! It was our understanding that all the old dry wall would be tore out, but that gentleman said that because it was not spelled out on contract that he couldn't do it and if we wanted him too, that would be a work change order, which would cost us more. (ONCE AGAIN--was told something different from salesman, and this was not our first construction project!). He also left a mess on the floor from the removal of the old tile--my husband had to get the shop vac out to get up the debrie! The drywaller's arrived on the 8th--there was texture on the old drywall. We asked installers if they were going to match the new drywall with the old by putting on texture, since all tear out was not done. They said no, but could do it for a $100 more money. We didn't agree to it because I refused to be nickeled and dimed! They finished their work quickly, putting on the first coat of mud over taping and stated they would be back on Tuesday (Jun 11th) to sand and put second skim coat on joints. Installer showed up on Monday, June 10th on time. YEA! He was friendly, respectfully of our house and very efficient! However the tub that my husband and I ordered and thought we would receive--was the wrong size. A new one was brought out at Rebath's expense. (Later found out the salesman had wrote down the wrong size!) The installer was there late into the night on Monday and cleaned up very well when his part was finished. The drywaller's didn't arrive the next day. I call Rebath by 4:00pm to find out what happened and they were surprised that they didn't show up and I was asked why I didn't call before 4:00 to see where they were! How is that suppose to be on the customer. After a couple of more phone calls between myself and the very nice lady that answers the phone at Rebath, it was arranged that they would come out later that week. My husband also had to make repeated phone calls to have Rebath to come back out and finish the job. Because they promise by them was to put your bathroom back and in better shape!. By Friday of that week--Rebath sent a gentleman out to finish the job--put the door back onto the bathroom and cut it down to fit since the new floor made the toekick stick up too much and the door wouldn't shut. They also needed to put the baseboards back onto the wall and connect the plumbing up at the sink. A two day turn around that is promised by Rebath in their advertisements, turned out to be a week long job--only to be finished and done right after much inspection and phone calls!!!!!! After a total of 7,200.00 spent, I can only hope their product holds up like they promised! Leary due to the fact that their promises haven't meant nothing yet! "
"Van Cleave Construction were very helpful in helping us decide on a solution to remodeling our 30+ year old master bathroom shower on a limited budget. We used the Onyx shower surround, which is a composite material, not tile or fiberglass. Examples can be seen at Ekards on the North Belt highway. After demolition, we discovered a serious code violation where an issue with the electrical wiring for adjoining rooms was not properly secured or routed away from the plumbing fixtures. Van Cleave was very prompt in getting a licensed electrician to come out and make the required repairs before moving on. The installation took less than two days. There was an issue with the glass doors coming loose from the mounts in the tracks and they sent someone out immediately and made the proper adjustments. The doors are now safe and secure. "
Canaan Stone Works (CSW) is a trusted, family-owned countertop fabricator serving the Kansas City metro for over 20 years. We specialize in granite, quartz, quartzite, and marble countertops, delivering high-quality fabrication and installation with an industry-leading 7-day turnaround.\n\nOur team manages every step in-house — from digital templating and precision CNC fabrication to professional installation — ensuring consistency, craftsmanship, and fast project completion. We offer a large selection of premium slabs, transparent pricing, and dependable service for homeowners, contractors, and designers.\n\nWhether you're remodeling, building new, or upgrading your space, CSW provides durable, beautiful surfaces backed by experience, technology, and a long-standing reputation for quality across Kansas City.
With over 25+ years of general construction experience, we are here to build the home of your dreams or remodel your living space into a place you will be most proud.
"Black Diamond was very responsive to my request and to provide an estimate. They are very patient with me and my lack of understanding of what all it takes to repair certain things.
When the work is done, the repair has made the area where the work was done better than it was at first.
Recommend highly"
You can cut countertops without chipping by using your saw correctly and having a new fine-toothed blade. You can also put masking tape on the front of the countertop material across the cut line and cut from front to back. However, it is very hard to cut countertops without chipping them, especially if they are made of stone or more fragile materials like laminate. The best advice is to know how to use the equipment, use the correct cutting method for the material, cut from back to front, move slowly, and practice on scrap material first.
It is not recommended to put a hot pan directly on a marble countertop. While marble is heat-resistant, it is not completely heat-proof, and extreme or prolonged exposure to high heat can cause discoloration, cracking, or chipping. Pans may also scratch or nick the surface. To protect your countertop and maintain its integrity, always use trivets or hot pads. Note that faux marble finishes do not resist heat and require protection from hot items at all times.
Most repairs take 2-4 hours. Extensive repairs or full refinishing may require additional time, typically up to a full day.
You should always seal cut countertops to prevent damage and to keep them looking their best. The right way to seal countertops depends on the type of material. For laminate and wood, apply epoxy or other specialty sealers by pouring it onto the countertop and letting it flow across the whole surface to the edges, guiding it with a paint stick or putty knife. You will need to move quickly so that it does not dry or harden before you are done. For stone countertops, use a sealant specially manufactured for your type of stone and apply it according to manufacturer directions.
For most homeowners, quartz and quartzite countertops are similar in price. The average quartz countertop installation costs $80 to $220 per square foot, while quartz countertops cost $70 to $200 per square foot. Of course, there are outliers, like if you choose a highly customized, rare natural stone with high-end finishes.
The Gower, MO homeowners’ guide to marble restoration services
From average costs to expert advice, get all the answers you need to get your job done.
Water damage restoration costs in Kansas City, MO, depend on the severity of the problem, the type of water, and the length of time the damage has been occurring.
Find out the average stone restoration cost in Kansas City, MO. Learn what you can expect to pay to polish and repair your natural stone surfaces today.
Thinking about marble restoration? Learn about polishing options, average costs to expect, and how to hire the right local pro to renew your stone surfaces.
