Get matched with top door pros in Gallatin, MO

Most of the time, a squeaky door is the result of dry hinges, where metal parts rub together without enough lubrication. Dirt, dust, or rust can also build up inside the hinge and add to the friction. Loose screws or slight misalignment can shift things just enough to create that irritating squeaking noise. Worn-out hinges or swelling wood from humidity changes can also be part of the problem on older doors. A good cleaning and proper lubrication usually take care of it, but if the squeak sticks around, it’s worth checking for bigger issues with the hinges or alignment. 

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

If a wooden door swells from temporary humidity or moisture, it should return to its original size as the environment dries out. However, if the door remains swollen due to prolonged exposure to moisture or water damage, it may not fully revert to its original shape and could require repairs or replacement. Using a dehumidifier and ensuring your doorway has good ventilation can help prevent and reduce swelling in wooden doors.

You can convert a pre-hung door into a Dutch door, but it’s more of a pain. Pre-hung doors are already set in the frame with the hinges and everything aligned, so once you cut the slab in half, you’ll likely need to adjust the hinge placement and maybe even mess with the frame itself. It’s doable, but expect some trial and error because it’s not a straight-swap situation.