"Didn't go with tanklees water heater, cost was outside our budget, ended up with standard 40 gallon heater. Everything went great, no drips, no runs, no errors. Technicians were great, no complaints."
Billy Owens is an Industrial Controls graduate from JCCC, has a masters in mechanical & founded our heating & cooling business in May of 2006. After working in the controls industry for 18 years Billy spent some time planning and constructing his own business. He was so enthralled with the process and end result that he decided to do heating & cooling full time. Since then Billy has provided residential, commercial and refrigeration services.\n\nWe professionally install, service and repair HVAC systems. Give us a call today.
"Everything went really smoothly. The acrylic product they use is of high quality. We had some concerns about our tub walls being a little spongy due to water demand, but they reinforced everything. The job was done in one day as promised. The end result as far as appearance exceed my expectations."
"We bought a house recently. The inspection report called for installation of an expansion tank and lengthened drip leg on the HW heater. Jamison Plumbing had installed the new HW tank several months before for the original home owner. Jason called the City of Liberty to determine the exact code requirements. He called back and agreed to the additional work at no charge. He was able to make the changes in a timely manner. His crew called to say they would be later than planned because of an unexpected delay at the preceding job site. We appreciated his willingness to finish the installation according to code and to cover the additional materials and time. It was a great way to be welcomed into a new community. "
"He was able to quickly diagnose that the water leak from the water heater was a result of a ruptured tank, resulting in the need to replace the entire water heater."
We pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business!
We take great pride our experience, expertise, quality, and customer service that we provide to meet the consumers' needs. It is our mission to provide excellent workmanship, and complete customer satisfaction from start to completion of a project. order to understand the needs, and expectations of our customers, we take great care to work, and communicate with every customer a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.
For most customers, residential or commercial, the roof is the best location for solar panel installation. It usually already has the structural specifications that the solar panels require. All that is needed is mounting hardware and appropriate flashings. Give us a call today to hear about our great rates.
While not all homes require a hot water heater expansion tank, they are necessary in most newer homes and are often mandated by local building codes. Codes typically require an expansion tank if your plumbing system is a 'closed-loop' system, which often includes a backflow preventer or pressure regulator on the main water line. Some municipalities have specific requirements. Installing an expansion tank on a closed system is crucial, as it prevents excess pressure that can damage your water heater and other appliances, potentially shortening their lifespan. However, tankless water heaters do not require an expansion tank.
Yes, you can convert a gas water heater to an electric one, but it is a complex process. You will need to ensure there is adequate power for the new electric unit, as they require more power than gas models. The project also involves safely closing off the gas lines and ventilation, and some cities may require a permit for the conversion. The cost can range from $1,500 to $4,100, depending on the installation scope, plumbing and electrical work, and the water heater model. For an accurate quote, it's best to contact a local professional. Also, be aware that your monthly utility bills may increase after the conversion, as natural gas is typically cheaper than electricity.
Due to the high temperature, using stainless steel vent pipes for your tankless water heater’s exhaust vent is best. Also, it is safe to use a flexible vent duct as the exhaust fan. If installing the exhaust fan yourself, make sure you are using heat-resistant silicon to connect the exhaust vent and the duct on your water heater.
The amount of time it takes to replace an electric water heater will depend on the skill level of the individual who is replacing it. For example, if you replace it yourself–and you don’t have much experience–you can expect the project to take a full day.
However, if you have a certified plumber or water heater contractor install your new water heater, it can take as little as 2 to 3 hours.
Several signs indicate your water heater may be failing or in need of replacement. Key indicators include:
Age: A water heater older than ten years is approaching the end of its typical lifespan.
Water Quality: If you notice rusty or discolored water from your hot water faucets, or a foul odor similar to rotten eggs or sulfur, it can signal internal corrosion.
Unusual Noises: Banging, rumbling, or popping sounds from the tank often mean sediment has built up, causing the unit to overheat.
Leaks: Any water pooling around the base of the tank or visible leaks are clear signs of failure.
Performance Issues: A decline in performance, such as water not getting hot enough, taking longer to heat up, low water pressure, or decreased efficiency, suggests the unit is struggling.
Visible Damage: Obvious rust and corrosion on the exterior of the tank can indicate a more serious internal problem.
While these signs often point to replacement, some issues may be fixable. It's best to consult a professional plumber to diagnose the problem before investing in a new unit.
The Craig, MO homeowners’ guide to water heater services
From average costs to expert advice, get all the answers you need to get your job done.
Looking to replace or upgrade your water heater? Use this water heater replacement cost guide to see what the work will cost and what factors affect your total.
A water heater flush costs $160 on average but can vary based on the unit size, type, labor, location, and more. Keep reading to learn how much you could pay.
Find out the average tankless water heater repair cost, what impacts pricing, and how to save. Get expert tips to plan your repair budget with confidence.
Who can install a water heater for you? Look to hire a water heater installation pro or a licensed plumber for this job because of the challenges involved.
The average lifespan of water heaters is 6 to 15 years for conventional models and up to 20 for tankless ones, but it can be less if they are not properly maintained.
