Best window and door contractors near Battlefield, MO

Window screens are available in several standard sizes. Common dimensions include 24 to 36 inches wide by 36 to 48 inches tall, as well as sizes like 18 by 14 inches and 20 by 20 inches. These often correspond to standard window sizes, such as 2 feet wide by 3 feet tall or 4 feet wide by 6 feet tall. Screens are also sold in replacement rolls to accommodate various dimensions. It is always best to measure your windows for accuracy before a repair or replacement. If your windows are a non-standard size, you will likely need to order custom screens, which can increase the cost. However, a screen does not necessarily have to fit the entire window, so you may be able to use a standard-size screen even if your window is slightly larger.

While sometimes used interchangeably, screen doors and storm doors have key differences. Screen doors are simple structures, typically composed of just a frame and a screen, designed to keep out bugs while allowing air circulation. In contrast, storm doors are heavier and more complex, built to protect your home's main entry door from weather and intruders. They usually feature an aluminum frame with interchangeable tempered glass and screen panels, allowing you to switch between ventilation and insulation. A storm door offers more protection and versatility but generally costs more than a basic screen door.

The screen on many screen doors is held in place by screen spline. Screen spline is typically a thin vinyl tubing that fits into the groove of the door’s frame and holds the screen in place. To install the spline on a screen door, you’ll need a spline roller—a tool that presses the spline and screen into the door’s narrow groove. Note that old spline can crack and break, so replacing your screens is a good time to replace the spline, too.

Window seals don’t last forever, so they’ll inevitably fail for one reason or another. One of the most common reasons is the expansion and contraction of the glass. When the glass gets warm from sunlight, it expands and adds pressure to the seal; at night, as the glass cools, it contracts. This process, day in and day out, can eventually cause the seal to fail. Other common sources of failure include the house settling over time, chemicals that damage the seal when repainting windows, and incorrect window installation.