Get matched with top pool table assembly pros in Worthington, MN

The best way to kill off an algae bloom in an aboveground pool is to shock it with a large dose of chlorine. Shock typically kills off algae in about one to three days, although it can take longer if the pool water is in poor condition. After the shock treatment, add algaecide to prevent algae from growing back, and test the water every few days with test strips to ensure the pool’s pH doesn’t get out of whack.

A swimming pool pump has to have water in it to run properly. If the pump isn’t primed and tries to run when it’s dry, the components will overheat which can cause the pump to seize up and can even damage the PVC pipes that carry the water into and out of it. Essentially, running a pump that isn’t primed can lead to having to replace the entire pump.

If a pool turns green after adding salt, there’s a good chance the salt is the problem. Certain brands of salt have high levels of iron that cause pool water to take on a green hue. Test your pool water to determine if this is the issue. The green color will usually filter out. Brush the sides of the pool to knock the iron off.

This is just one reason a pool can turn green that is specific to adding salt. Many other reasons a pool can turn green include algae growth, low chlorine levels, a faulty filter, etc.

It’s a good idea to call in a pro to fill in your pool, because there are many potential hazards to doing it yourself. Unless you’re careful, you can damage your septic tank, plumbing pipes, and sprinkler lines. It’s also possible to damage your sewer connections, utility lines, driveway, landscaping, and sidewalk.