Robinson Masonry, LLC, is your leading source for all things brick and stone! Give us a call today! We have been proudly offering the highest quality masonry work in the area for over three years, and would love to come out to your home and take on your next project.
Furniture repair costs around $200 on average, and most project costs fall between $100 and $500. The price you can expect to pay will depend on the type of furniture you’re repairing, the extent of the damage, and the size and age of the piece. Reupholstering and couch frame repair are the most expensive, sometimes costing $1,000, while fixes like repairing a scratch or replacing a spring in a couch or armchair will usually cost under $100. Older furniture requires more care and will typically cost more to repair.
Yes, you can repair cat scratches on leather furniture. A quick fix that won’t repair roughness is a leather recoloring balm that helps scratches blend in. Otherwise, use the following process.
Clean the area and trim loose fibers.
Rub leather binding glue all over the affected area.
Sand the area down with fine-grit sandpaper and clean off any residue.
Fill holes, scratches, and gouges with leather putty from a leather repair kit.
Sand the area down again and clean off any residue.
Apply leather colorant in several layers.
Seal the color in with a leather sealant and finish.
It’s possible to repair damaged leather as long as the damage is not too severe. Professional leather repair specialists can fill, smooth, and refinish damage like scratches, cracks, and other damage by color matching the rest of the leather. Leather repair pros can evaluate the damage and recommend a plan for repair or replacement. If the leather is on furniture or another item that’s difficult or impossible to replace, repair is the best option, even if the repair does not match perfectly.
Fixing a drawer that is sticky, askew, or broken depends on the specific problem. Start by removing the drawer and examining the slides and tracks for any damage, bent parts, or loose hardware.
For minor issues:
Clean and Lubricate: If the slides are just sticky, clean them and the corresponding tracks with a hot, damp cloth. Then, apply a lubricant like silicone spray or bar soap to help them glide smoothly. Also, check any roller wheels for problems.
Tighten Screws: Tighten any loose screws on the slides and tracks. If screw holes are stripped, you may need to fill them and re-drill.
For more significant damage:
Bent Hardware: If a slide is bent, you may be able to remove it, straighten it out, and reinstall it.
Broken Parts: If a slide or track is broken or severely damaged, it will need to be replaced. Unscrew the damaged part and install a replacement that matches the type and size of the original.
After performing the repair, reinsert the drawer and test it to ensure it opens and closes smoothly, making any final adjustments for proper alignment. It can also be helpful to consult the manufacturer's guidelines for your specific drawer system.
It is often worthwhile to refinish or restore furniture, especially for high-quality, older, antique, or sentimental pieces. Older furniture tends to have better durability than modern, mass-produced items, and refinishing can cost about one-third of the price of replacement. To determine if it's cost-effective, compare quotes from local refinishing services with the price of a new, similar piece. Refinishing can refresh a piece's look and extend its lifespan. However, it may not be worth it for newer furniture made of medium-density fiberboard (MDF) or plywood, or for items with major structural damage. A professional can help you assess the piece and decide on the best course of action.
The Wheaton, MN homeowners’ guide to chimney repairs
From average costs to expert advice, get all the answers you need to get your job done.
Notice leaks and corrosion around your chimney? You might need new flashing or some careful repairs. Here are some common chimney flashing repair costs.
