Can you cut a shipping container apart?

• <div><p>Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.</p></div>

Are hot water heaters good for scrap metal?

• <div><p>Since water heaters are primarily made of metal, they’re commonly accepted by scrap yards and collectors. Don’t expect to fetch a high price, though—water heaters are mostly steel and aluminum, which aren’t high-value metals. Some components are made of more valuable metals, like brass and copper, but they’re a small portion of the heater and won’t affect the price much.</p></div>

Get matched with top welders in Wells, MN

Q: Can you cut a shipping container apart?

• <div><p>Yes, but you&rsquo;ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around &frac34; inch thick, so it&rsquo;s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.</p></div>

Q: How much does it cost to hire a metal fabrication professional?

• <div><p>Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.</p></div>

Q: Can you use a saw to cut metal pipe?

• <div><p>Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.</p></div>

Q: Are hot water heaters good for scrap metal?

• <div><p>Since water heaters are primarily made of metal, they&rsquo;re commonly accepted by scrap yards and collectors. Don&rsquo;t expect to fetch a high price, though&mdash;water heaters are mostly steel and aluminum, which aren&rsquo;t high-value metals. Some components are made of more valuable metals, like brass and copper, but they&rsquo;re a small portion of the heater and won&rsquo;t affect the price much.</p></div>

Q: How much do different welding projects cost?

• <div><p>Some welding projects, such as <a href="https://www.angi.com/articles/cost-to-repair-leaking-pipe.htm">repairing pipes</a> or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:</p><ul><li><p>Metal furniture repair: $35&ndash;$100</p></li><li><p>Pipe repair: $200&ndash;$1,000</p></li><li><p>Small gates: $550&ndash;$750</p></li><li><p>Fencing: $1,200&ndash;$1,800</p></li><li><p>Fabricated sheet metal welding: $750&ndash;$2,500</p></li></ul><p></p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Wells, MN?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Wells, MN

*The Angi rating for Welding companies in Wells, MN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Wells, MN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on May 01, 2026

Reviewed in May 2026
Valerie the siding need help the siding was missing in some spots the bathroom has a leak or to needs new tub. Valerie was wonderfully and true with me from start to finish
DaBella - Rochester (Bath/Siding)
Request a quote
Reviewed in November 2024
Brayden with Grind Pros did an excellent job for me. He removed 3 stumps in a timely manner. Very pleased with the work performed and will be calling again for future stump removal.
Grind Pros LLC
Request a quote
Reviewed in April 2024
They came over and gave us a quote said they would be back in two days to cut down the 11 trees. Cut down, hauled away, cleaned up and raked. Hard worker and very respectful.
Foth's Top Notch Tree Service, LLC
Request a quote
Reviewed in March 2024
Gabriel was the project manager and was very good at explaiing everything and checking with me to make sure I was pleased with the work being done in my basement. They started on Monday and was all finished on Friday. Very pleased with the completed work.
American Waterworks
Request a quote
Reviewed in March 2024
Very well. Has great workmanship and good attention to details. Very pleased.
Paint Bros LLC
Request a quote
Reviewed in May 2023
I needed to demo a house. I needed asbestos testing and removal. By far, I am happy with the work, price and prompt service.
JMAX Specialty Contracting, Inc.
Request a quote
Reviewed in July 2022
It is my pleasure to report about my experience last year in searching for a house. My husband and I were fortunate to have had Angela Stroh recommended to us. Once we contacted her, she immediately began to understand our preference and needs and recommended many properties that we considered....
Kris Lindahl
Request a quote
Reviewed in July 2022
Good service very respectable guy on time
Optimum Exterior Cleaning, LLC
Request a quote
Reviewed in May 2022
We used Snap Construction to do some insulation work in our attic and walls. They were beyond professional and efficient while working on the house. We were really impressed! All of the crew members we interacted with were polite and respectful. The product is working great too. Our house is...
Snap Construction Inc
Request a quote
Reviewed in May 2022
Shawn did a very thorough job and explained everything in such great detail that was so easy to understand. The whole experience from scheduling to the final report went so smooth. Any issues he found, he told us how we could remediate. Highly recommend!!
7 Attics Home Inspection
Request a quote

Find Welders in Wells

JD Metal Fab

5.0(

)

Serving Wells, MN and surrounding areas

In business since 2022

Free estimates

Offers commercial services

"Did our 316 stainless piping for Agri Systems. He was hard to get a hold of and had some scheduling conflicts but exceeded our deadlines and did great work. Seemed very knowledgeable. Will be doing expansion work for us in the future."

Response time6 days

Recommended by100%of homeowners

Request Quote

Hampton Enterprise LLC

3.7(

)

Serving Wells, MN and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"I only use James when I need some work done to my house. He responds fast, gets the work done quicker than just about anyone else I've ever used and seems very concerned with leaving his customers happy."

Recommended by60%of homeowners

Request Quote

Cox Welding Service

New to Angi

Serving Wells, MN and surrounding areas

In business since 1998

Free estimates

Offers commercial services

We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.

Request Quote

Grunwald and Sons LLC

New to Angi

Serving Wells, MN and surrounding areas

In business since 2020

Free estimates

Credit card accepted

We are a locally owned and operated company that values honesty and integrity in all aspects of our business. Our dedicated team of professionals have over 4 years of hands on experience, to provide innovative ideas and suggestions tailored to your projects. Our services are customized to your individual needs, paying close attention to the details of each project that we are involved with. Please feel free to contact us today

Request Quote

Welding questions, answered by experts

Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.

Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

Since water heaters are primarily made of metal, they’re commonly accepted by scrap yards and collectors. Don’t expect to fetch a high price, though—water heaters are mostly steel and aluminum, which aren’t high-value metals. Some components are made of more valuable metals, like brass and copper, but they’re a small portion of the heater and won’t affect the price much.

Some welding projects, such as repairing pipes or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:

Metal furniture repair: $35–$100
Pipe repair: $200–$1,000
Small gates: $550–$750
Fencing: $1,200–$1,800
Fabricated sheet metal welding: $750–$2,500

The Wells, MN homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Kelly Weimert
•
May 30, 2026May 30, 2026
How Much Does a Pipe Fence Cost? [2026 Data]
Pipe fencing is an extremely strong, durable option for containing horses and other livestock. This guide breaks down the factors that affect pipe fence cost.
Scott Dylan Westerlund
•
May 30, 2026May 30, 2026
How Much Does Sheet Metal Fabrication Cost? [2026 Data]
Get transparent sheet metal fabrication cost info for your project. Learn what impacts price, compare options, and plan your project with confidence.
Angi
•
Apr 4, 2026Apr 4, 2026
How Much Does Wrought Iron Railing Repair Cost? [2026 Data]
Get expert insights on wrought iron railing repair cost, including average prices, key cost factors, and tips to save on your next project.
Stacy Sare Cohen
•
May 22, 2026May 22, 2026
Melding Art and Skill: How to Hire a Qualified Welder
When you need help with a metal project and don’t have the expertise or the time, call an expert welder for your project. Here’s how to vet and hire a welder.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Steel Beam Installation Company
Find the right steel beam installation company for your project. Learn what questions to ask, qualifications to check, and how to ensure structural safety.
Angi
•
May 21, 2026May 21, 2026
Who to Hire for Wrought Iron Fence Repair
Discover who to hire to repair a wrought iron fence and handle iron fence repair. Compare pros, see the process, and hire with confidence today.