Get matched with top marble restoration pros in Tower, MN

Unsealed granite is more susceptible to staining and other damage. Regularly sealing your granite countertops decreases the chances you’ll need to repair damaged countertops in the future. It also keeps it looking shiny rather than becoming dull over time. You can check whether your granite needs resealing by putting a few drops of water on the counter and waiting 15 minutes to see whether the water permeates the surface.

In many cases, it’s worth it to restore stone. Stone restoration generally costs less than replacing the stone entirely, helping to save on the cost of your project while still giving your home’s stone a polished appearance. However, if your stone is very cracked or crumbling to the point of compromising the structural integrity of your home, you may want to consider replacing it. Stone flooring costs range from $6 to $20 per square foot on average.

White quartz is a very low-maintenance countertop material. It’s nonporous, so it won’t stain, even if you spill dark liquids on it. The light color will make dirt show up much easier, but a simple wipe-down will keep the countertops looking fresh and bright for years to come. However, it might not be the best kitchen countertop idea on a budget because it's expensive.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.