Get matched with top snow removal pros in Saint Michael, MN

It’s possible to use a torch to melt ice on your garage door, but we don’t recommend it. It’s very easy to bring the flame too close to the door, which can melt the weather stripping or even the garage door itself. You’ll melt ice quickly with a torch, but the damage you’re likely to cause can end up costing you a few hundred dollars to fix, which isn’t worth it. Instead, we recommend pouring hot water over the frozen area or using a less intense heat source, like a hair dryer or space heater.

Generally, the cost of ice dam removal is not covered by homeowners insurance because it is often considered preventable maintenance. However, the damage caused by ice dams is frequently covered. Depending on your policy, this can include interior water damage, roof collapses, and damage to shingles. Coverage for personal belongings affected by leaks may vary. It is important to check your policy details or contact your insurer to confirm what your plan covers. Keep in mind that any damage resulting from a DIY attempt to remove an ice dam will likely not be covered.

Whether or not an annual snow removal contract is worth it depends mainly on location. If you live in an area with frequent heavy snowfall, a yearly contract could be better than paying per clearing. If you live in an area where it only snows a few times a year, paying per snowstorm may be a better option.

When starting the engine, you typically leave the choke on a snowblower in the "choke" or "closed" position. After starting, let the engine run for a few minutes to warm up. Then, gradually open the choke, moving it to the "open" or "run" position, allowing more air into the engine and transitioning to a normal fuel-air mixture. The exact duration varies based on the snowblower model and ambient temperature, but as a general rule, you should open the choke once the engine has stabilized and runs smoothly, typically within a few minutes.