Get matched with top floor polishers in Roseau, MN

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

Polishing a concrete floor isn’t as expensive as it sounds—it’s actually one of the more budget-friendly upscale flooring options out there. On average, it costs $4,500, with most projects falling between $1,000 and $8,000 . When you’re working with an existing slab of concrete, you skip material costs entirely, so it’s even more affordable. If you want a glossy, durable floor without paying hardwood or tile prices, polished concrete delivers serious shine without the sticker shock.

Yes, but with caution. A floor grinder is intended to level and polish concrete, so it is a very powerful tool. To remove paint, the floor grinder should be set to 35 square feet per minute or less to minimize the pressure without the use of pocket weights. You might need to go over the surface two times to get any paint that has sunk into the concrete’s pores.

Using too much soap or floor cleaner can leave your laminate floors looking dirty or cloudy after mopping. Only use a teaspoon of soap or cleaning solution in a gallon of water. Additionally, always be sure to sweep or vacuum laminate floors before mopping to ensure you pick up dried grit, hair, and dust that can be harder to catch with a wet mop.