Get matched with top dishwasher installation pros in Rogers, MN

There are some dishwasher care tips to extend its longevity and keep your dishes sparkling. Not overloading your dishwasher is key to letting water and soap move freely through the unit. Too much soap can stress your dishwasher unnecessarily, causing it to break down sooner. 

Cleaning your dishwasher is essential for its performance, so every three to six months, put two cups of white vinegar in a dishwasher-safe cup on the top rack and run a complete cycle. When done, place ¼ cup of baking soda inside and run a short cycle to eliminate any lingering odors.

Dishwashers should be cleaned a minimum of once every 3 months, but really it should be done monthly. This is to prevent germ buildup and will help keep your machine running smoothly. Dishwasher maintenance isn’t too difficult, you’ll simply clean the filter, wipe down the spray arms with vinegar or rubbing alcohol, and run the cycle on empty. If there is any debris, you can remove it with a small metal pick. Do not use wood as the tip can break off inside the machine.

Installing a dishwasher should take one to four hours, depending on the complexity of the installation and whether you DIY or hire a pro. Even if you're particularly handy, installing a dishwasher on your own will likely take longer — at least two hours. On the other hand, a professional can likely install a dishwasher in about an hour. Installation time will take longer if you have to remove an existing dishwasher, reroute plumbing, or repair damaged flooring underneath the appliance.

Yes, you can use vinegar to unclog a dishwasher. To do so, combine 4 tablespoons of white vinegar with 4 tablespoons of baking soda and pour the mixture down your dishwasher’s drain. Let it sit for 15 minutes, then pour a cup of hot water down the drain to flush everything out. Finally, run a rinse cycle on your dishwasher to see if the clog is gone.