"Pictured is the before battery compartment. All rusted and hopeless. Josh invented a perfect plan to weld a tray to the two sides that were not rusted. Worked perfect. Even an RV place commented on the great job he did. What looked like a hopeless cause, turned into solid craftmanship. I Just hope he's available and doesn't get too busy.."
"The communication from Diamond Cut Solutions was the best I've ever experienced from any contractor of any sort. Friendly, courteous, provided project updates and always on time. Excellent experience."
"Went pretty well, one of my sprinkler lines was hit during the install, but I knew that could be an issue going in. One of my gate latches was welded very poorly, but the company was pretty quick to fix it once I found the issue."
"Dan came out within 5 days from first contact and provided an initial bid, he walked through my needs and issues with the current fence and gave some good recommendations on the project approach and repairs. There were 2 other bids on this project and Dan was not only competitive in his pricing he was significantly lower than one of the bids (they stated their schedule and how small the work was attributed to the inflated cost but they bid on the EXACT SAME scope and material). Topline was able to come out within 2 weeks of the initial bid as they accommodated the work in between larger projects (thank you Dan!). The work was wonderfully performed. The new gates are great and the extension was seamless! Thanks for the great work and such an immediate response!"
"Roman and the team at A to Z Remodelers & Builders were excellent to work with. Roman was very helpful with any questions we had through the whole process. We had new windows and siding and we couldn't be happier with the results. While working on the windows and siding, we ran into an issue with our deck and some water damage which they made sure to explain my options and how to take care of it. They made sure I was informed of all my options and were able to take care of it so we wouldn't have the issue in the future. When the team was finished working each day, we couldn't even tell anyone had been at our house working because they would do an excellent job of cleaning up after themselves. I couldn't recommend A to Z Remodelers more! Thank you for the excellent work!!!"
Welcome to Q Shop LLC! We offer welding, fabrication, and machining services to businesses as part of the supply chain. We also complete repairs and fabrication services for clients provided they are able to bring the item to our facility. We do not provide services at the customer's site. \nHowever, due to COVID19, we are limiting our services to business to business at this time.
Metalcore Welding and Repair, LLC, is a full service welding company with over 7 years of experience. We are honest, loyal and provide the best customer satisfaction in town. We pay very close attention to detail and owner is always on site to ensure quality work. Call us for a free estimate!
"Overall we were satisfied with the quality of the job but we did run into some issues. Sam said it would take 2 days to complete but it ended up taking 6 full days. Unfortunately I had to use a lot more vacation to be home for this than I anticipated. We ran into some issues with the sub-contractors. One guy got nothing done the day he was there and then never showed up the next day. To Sam's credit, he called in another framer and the work was started as soon as possible. The quality was decent but we ended up having to fix some spots ourselves and add some extra framing to make the areas aesthetically pleasing. The crew members were all polite and cleaned up after themselves, which I always appreciate. Sam is very easy to work with and very professional. He takes his business seriously and has high expectations of his crew. Despite the issues we encountered we were still happy with the work and the price."
we are a family owned welding repair and fabrication shop. we also offer mobile services to better meet everyones needs.we have been doing this for 6 years for contractors only we are now branching out trying to grow ourselves!
Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.
Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.
Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.
Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.
Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.
The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.
The Mound, MN homeowners’ guide to welding services
From average costs to expert advice, get all the answers you need to get your job done.
The cost to install a 240-volt outlet in Minneapolis, MN varies depending on the amperage and the home’s current wiring conditions. Use this guide to budget for your next project.
When you need help with a metal project and don’t have the expertise or the time, call an expert welder for your project. Here’s how to vet and hire a welder.
