Get matched with top welders in Kasota, MN

Q: How do you cut round ductwork?

• <div><p>Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.</p></div>

Q: How much do different welding projects cost?

• <div><p>Some welding projects, such as <a href="https://www.angi.com/articles/cost-to-repair-leaking-pipe.htm">repairing pipes</a> or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:</p><ul><li><p>Metal furniture repair: $35&ndash;$100</p></li><li><p>Pipe repair: $200&ndash;$1,000</p></li><li><p>Small gates: $550&ndash;$750</p></li><li><p>Fencing: $1,200&ndash;$1,800</p></li><li><p>Fabricated sheet metal welding: $750&ndash;$2,500</p></li></ul><p></p></div>

Q: Can you use a saw to cut metal pipe?

• <div><p>Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.</p></div>

Q: How long does it take to ground a rod?

• <div><p>It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job. </p></div>

Q: What household tool can cut a metal pipe?

• <div><p>Your typical household tools will not cut a metal pipe. To cut a metal pipe, you&rsquo;d need more specialized tools like a pipe cutter or circular saw. Do not attempt to use these tools without taking proper safety precautions and wearing safety gear. It&rsquo;s usually safer to let a pro cut a metal pipe, especially if you&rsquo;re not confident in your skills with a heavy-duty saw. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Kasota, MN?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Kasota, MN

*The Angi rating for Welding companies in Kasota, MN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Kasota, MN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on April 17, 2025

Reviewed in April 2025
Great Arrrived on time. Did excellent job of fence removal and clean up afterwards. I would definitely use them again if needed
J&M Clean Sweep LLC
Request a quote
Reviewed in February 2025
Great experience all around from Will in sales, Kevin as project coordinator and contractor’s that completed the roof and rain gutters. The job site was cleaned up so well after you could not even tell they were there. Would recommend to anyone.
CoMitted 365 Roofing & Exteriors
Request a quote
Reviewed in December 2024
Went very well- neat workers & cleaned up very well after.
Spartan Construction
Request a quote
Reviewed in February 2024
We live in Rock Hill and have used A. J. Adams' plumbing for years. In addition to above services, he replaced pipes in my daughter's condo which had defective pipes throughout, installed new vanities and new floors in two bathrooms in my house, replaced a leaking pipe from the city...
Adams Family Plumbing LLC
Request a quote
Reviewed in October 2023
The contractor was on time, he was prepared to work with all the necessary tools he needed, he was respectful, courteous and knowledgeable about the renovation. Not only would I recommend him, but I will be using him for a future projects as well.
Dream Renovations, LLC
Request a quote
Reviewed in July 2022
Gregg Poindexter was the service technician. He was great. His explanations were thorough. I now understand about the wall repair system.
Groundworks
Request a quote
Reviewed in June 2022
This is 2nd project I had American waterworks help me with. First was basement wall stabilizing, this one sidewalk leveling. Both crews were well knowledgeable, kind, explained procedures. Very happy with this company!
American Waterworks
Request a quote
Reviewed in May 2022
I called J & M Plumbing because my water heater stopped working and I was trying to get it fixed as soon as possible. I called Friday evening and the person on the phone was so kind and did everything they could to get someone to me that day. At first I was told nobody could come until Monday,...
J & M Plumbing, LLC
Request a quote
Reviewed in September 2021
Steve was up to task for re-facing a large wood deck with Trex composite decking. He worked well with my material supplier with the materials needed with very little overage which I was able to return. He took the time to make sure everything was done right and up to Minnesota codes. All the...
Cross Carpentry
Request a quote
Reviewed in June 2021
Communication was excellent. In fact I had two calls to make sure I knew when they were coming. During the process I was consulted on any changes or what had to be changed to make the new tub work. Dave and his crew were on time, respectful, professional, communicative and their work was...
MINNESOTA RUSCO
Request a quote

Find Welders in Kasota

JD Metal Fab

5.0(

)

Serving Kasota, MN and surrounding areas

In business since 2022

Free estimates

Offers commercial services

"Did our 316 stainless piping for Agri Systems. He was hard to get a hold of and had some scheduling conflicts but exceeded our deadlines and did great work. Seemed very knowledgeable. Will be doing expansion work for us in the future."

Response time6 days

Recommended by100%of homeowners

Request Quote

Hampton Enterprise LLC

3.7(

)

Serving Kasota, MN and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"I only use James when I need some work done to my house. He responds fast, gets the work done quicker than just about anyone else I've ever used and seems very concerned with leaving his customers happy."

Recommended by60%of homeowners

Request Quote

JMJ Mobile Welding

New to Angi

Serving Kasota, MN and surrounding areas

We guarantee your satisfaction, and we won’t leave until the job is done right. We pride ourselves on the quality work we provide, while delivering great customer service! Check out all the services we offer below and call -or- click to schedule an estimate today! \n

Request Quote

Grunwald and Sons LLC

New to Angi

Serving Kasota, MN and surrounding areas

In business since 2020

Free estimates

Credit card accepted

We are a locally owned and operated company that values honesty and integrity in all aspects of our business. Our dedicated team of professionals have over 4 years of hands on experience, to provide innovative ideas and suggestions tailored to your projects. Our services are customized to your individual needs, paying close attention to the details of each project that we are involved with. Please feel free to contact us today

Request Quote

Welding questions, answered by experts

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

Some welding projects, such as repairing pipes or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:

Metal furniture repair: $35–$100
Pipe repair: $200–$1,000
Small gates: $550–$750
Fencing: $1,200–$1,800
Fabricated sheet metal welding: $750–$2,500

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job.

Your typical household tools will not cut a metal pipe. To cut a metal pipe, you’d need more specialized tools like a pipe cutter or circular saw. Do not attempt to use these tools without taking proper safety precautions and wearing safety gear. It’s usually safer to let a pro cut a metal pipe, especially if you’re not confident in your skills with a heavy-duty saw.

The Kasota, MN homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Scott Dylan Westerlund
•
May 30, 2026May 30, 2026
How Much Does Sheet Metal Fabrication Cost? [2026 Data]
Get transparent sheet metal fabrication cost info for your project. Learn what impacts price, compare options, and plan your project with confidence.
Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Angi
•
Apr 4, 2026Apr 4, 2026
How Much Does Wrought Iron Railing Repair Cost? [2026 Data]
Get expert insights on wrought iron railing repair cost, including average prices, key cost factors, and tips to save on your next project.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Metal Awning Pro
Find the best metal awning professional for your project. Learn what qualifications to check, questions to ask, and how to hire a reputable pro.
Sara Coleman
•
Apr 6, 2026Apr 6, 2026
Journeyman Carpenter vs. Carpenter: Who to Hire for Your Project
While both can perform most carpentry work required for house projects, the major difference between a journeyperson vs. a master carpenter is their years of experience.
Stacy Sare Cohen
•
May 22, 2026May 22, 2026
Melding Art and Skill: How to Hire a Qualified Welder
When you need help with a metal project and don’t have the expertise or the time, call an expert welder for your project. Here’s how to vet and hire a welder.