Get matched with top epoxy flooring pros in Hendricks, MN

Polished concrete gets its glass-like finish from several rounds of polishing, using increasingly finer grit diamond grinding pads. The concrete’s hardness will determine which grits you need to get your desired finish. The densifier and sealer also contribute to the look of the final floor, so either talk to a concrete pro (or hire one) to achieve the right concrete floor finish.

While you shouldn’t use thinset mortar on its own as a floor leveler, it can work alongside other products to help level floors. For instance, you could start with a self-leveling compound, let that dry, then apply backer board with thinset mortar to help fully even out the floors ahead of laying tile.

Interlocking garage tiles made with PVC are the most effective for garages with past issues of humidity and flooding because damp concrete is not suitable for paint. Epoxy coating is also water-resistant and can prevent mold buildup. Finally, porcelain tiles are a wonderful option for wet conditions if your budget allows.

Mix the resurfacer into a sticky mixture. The consistency should look like mashed potatoes. Use a squeegee to push the resurfacer across the pitted area and smoothen the surface with a cement trowel flush. Make sure you protect any expansion joints with a weather strip. Alternatively, cut out any resurfacer that touched the joint once the mixture begins to harden.