Get matched with top countertop and backsplash pros in Hector, MN

The angle at which you cut countertops depends on the material, your intended outcome, and the location of the cut. For example, rather than cutting a straight 90-degree angle for internal corners, cut edges at a 45-degree angle to give a clean, professional look. For outside edges, most homeowners want squared-off sides, so 90-degree angles can make the most sense there. Because you want to get angles exactly right to minimize seams and eliminate the need for patching, be sure to measure several times before cutting and use the right equipment to get sharp, accurate angles.

The timeline to install countertops largely depends on the materials and the job size. Installing granite countertops takes anywhere from two to seven hours, though complex designs can pass the eight hour mark. Average-sized quartz countertops take two to five hours to install, though most pros will recommend a 24-hour settling period. Marble, on the other hand, is finicky and can take up to two whole days to install. No matter how you slice it, however, a professional is going to complete the job much quicker than an amateur.

Unfortunately, you cannot put hot pans directly on laminate countertops, as the heat can cause significant damage. The heat can cause chips, burns, and marks, plus weaken the laminate. If you do have something hot you need to set down, then be sure you use a trivet or towel as a barrier between the countertop and pan so you can prolong its life.

No, you don't have to apply polyurethane to butcher block countertops. Polyurethane sealant is a long-lasting finish for a butcher block counter, but its application also requires thoroughly sanding the surface multiple times. Other materials, such as mineral oil, require less work but must be applied more frequently.