Get matched with top carpenters in Grasston, MN

"Mark and his experience in carpentry truly made a difference! He had great insight into the project and his communication throughout was appreciated. And the end result is really beautiful. So glad I hired him and would use his services again."

"Project of demo old deck and build a new to the same plan did not get started until late November. There were periodic weeks during the winter that did not allow for any work. The company owner/manager(Ivan) kept us informed of the status. The quality of workmanship was very good and followed the city inspection. Project that was over 15K came in at the bid price."

"Jeff removed all my ceiling molding prior to new ceiling install, then installed 600 linear feet of new molding. Exceptional attention to detail and was very creative in challenging situations. Very happy with final results.. I would highly recommend Jeff and his team for finished carpentry work. I appreciate his professionalism and dependable service."

JM'S Property Repair is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers interests and make their concerns the basis of our business. I have been doing construction all my life and enjoy what I do. Contact me if you want references.

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

"Hal's work is top-notch but I grew increasingly frustrated with the timing and inconsistency of his work habits. His was one of several estimates I received and basically he said he would beat any estimate I received. The difference is that everyone else was going to use cedar and he only works with pressure-treated Southern yellow pine, which is less than half the cost of cedar. I was unsure of the durability and longevity of that product so I did extensive research online. Still unsure, I drive around the Twin Cities to see other jobs Hal did that gave stood the test of time and I decided to move forward. Clearly, the way he builds his fences require considerably more manual labor than those built with cedar posts and pickets so essentially instead of paying for the higher cost of cedar, you pay for increased labor costs. Unfortunately, Hal isn't as going as predicting when he will get jobs complete as he is completing them well. He was over a month late in getting started and I repeatedly had to call him to inquire about the delay. It was quite frustrating but since I didn't absolutely need the fence done by a certain date, I decided to practice patience. Once he finally started, most days he and his helper only worked 4 hours so the project dragged on far longer than I thought it would. Admittedly, there were a couple of weather-related days but other times when it was a perfect day, they wouldn't show up and I would give no idea when they were coming again. After I told him I really needed to have him be more communicative, he was and within a short time after that conversation, he completed the fence. The fence is beautiful and appears very sturdy. We'll see how it withstands time and weather but for now I am very happy with it. Hal does beautiful work but if you are on a strict timeline I would not recommend working with him. If you are flexible and don't mind putting more effort into communication, he is a great person to work with.
"

Welcome to The Vision Services!! Being in business since 2019, but with over 15 years experience. With that experience you are in the care of some of the best products and services you could ask for ! In that 15 years experience we turned that into an incredible product line. A list of things we specialize in are \n\nRoofing/Siding\nStorm damage\nWindows \nDecks \nKitchen Remodeling \nBasement finishing \nBathrooms \nCement\nPainting (Interior/ exterior)\n\nMix that amazing line up with some great customizable finance options for you the homeowner to benefit from!

With over 15 years of experience in the home improvement industry, we are the industry leader you need to take care of your home or business. We handle everything from preliminary designs to executing the build on the new deck of your dreams. We will treat your home as we would treat our own. Give MCN Construction a call today, we look forward to working with you!

I am proud to provide a full range of remodeling and handyman services. I am very detail oriented, and take pride in my work. Locally owned, insured and with many years of experience. Call me today at 763-923-8063, looking forward to helping you with your next project!

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"