Get matched with top driveway gate pros in Freeport, MN

If you only use your gate as a pedestrian, walking through without a vehicle, you’re fine to stick with a single fence gate. If your fence opening needs to accommodate vehicles of any kind, from cars to trucks to 4-wheelers, then a double fence gate will suit the space much better and give you more freedom. 

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

Double gates come with the same gaps as single gates, with hinges taking up a quarter of an inch of space. The difference is that double fence gates also have a center gap, which needs a little more clearance. Space the center gap at half an inch instead of the usual three-eighths of an inch for a single gate. 

Your gate should be 3/4 to an inch smaller than the opening. The opening size that you need for your gate can vary depending on your hinge type. You may also need to add reinforcing braces if the gap between your gate and the fence is not uniform from top to bottom.