Get matched with top pool and spa technicians in Farmington, MN

Whether you can repair a hot tub depends on the severity of the problem and the location. With the right tools and knowledge, you can fix problems like small leaks or switching out a dirty filter. However, electrical and plumbing issues require a licensed professional due to the inherent risk, particularly when mixing water with electricity.

To refill a hot tub after winter, start by opening up the tub and giving it a quick cleaning. If you use antifreeze, drain out the water then grab a hose and thoroughly clean the tub shell out, spraying water into each jet of the tub. 

Reconnect the hot tub and turn the power back on. When it’s time to fill the tub again, insert the hose into the filter well (if available). Avoid trapping too much air in the water lines, which can cause the pump to lock up when it starts again. Add the necessary chemicals and start the heating process. It will take some time—most of a full day—for the water to heat up again.

Where you drain a hot tub largely depends on local regulations, but you must not drain chemically treated water where it can damage the environment. Direct the water toward a sanitary sewer drain that will take it to a treatment facility. If your lawn has a dedicated drainage area that’s free from plants and foundations, you can likely drain it there. Avoid storm drains, as the hot tub water will enter waterways and could hurt aquatic life. Likewise, do not pour it out directly on any public land or where it can get into your neighbors’ property. 

Vinegar can be used as an all-purpose cleaner for many things, including hot tub filters. Soaking hot tub filters in vinegar and water for up to 24 hours can remove dirt and oil, and as a bonus, it won’t cause the water to foam after you reinstall it if there’s vinegar left on it. But make sure you still rinse it to remove any debris, dirt, or grime stuck on it.