Get matched with top chimney repair specialists in Cushing, MN

Yes, many professionals offer sustainable options for both materials and finishes.

High humidity and moisture are the main causes of wood furniture damage, which cause it to warp or crack. You’ll always want to quickly clean and dry any spilled liquids on wood. Make sure you’re storing your furniture in dry places unless it’s been weather treated—that means your outdoor patio may not be the best spot for your antique side table.

Fixing a drawer that is sticky, askew, or broken depends on the specific problem. Start by removing the drawer and examining the slides and tracks for any damage, bent parts, or loose hardware.

For minor issues:

• Clean and Lubricate: If the slides are just sticky, clean them and the corresponding tracks with a hot, damp cloth. Then, apply a lubricant like silicone spray or bar soap to help them glide smoothly. Also, check any roller wheels for problems.

• Tighten Screws: Tighten any loose screws on the slides and tracks. If screw holes are stripped, you may need to fill them and re-drill.

For more significant damage:

• Bent Hardware: If a slide is bent, you may be able to remove it, straighten it out, and reinstall it.

• Broken Parts: If a slide or track is broken or severely damaged, it will need to be replaced. Unscrew the damaged part and install a replacement that matches the type and size of the original.

After performing the repair, reinsert the drawer and test it to ensure it opens and closes smoothly, making any final adjustments for proper alignment. It can also be helpful to consult the manufacturer's guidelines for your specific drawer system.

There are many tips and tricks you can try to make your dresser drawers stop sticking and slide easier. You can rub a small amount of beeswax on the drawer slides or apply paraffin wax in the same manner. If you need to unstick wooden dresser drawers, consider using silicone, graphite, or Teflon-based lubricants for best results.