Are hot water heaters good for scrap metal?

• <div><p>Since water heaters are primarily made of metal, they’re commonly accepted by scrap yards and collectors. Don’t expect to fetch a high price, though—water heaters are mostly steel and aluminum, which aren’t high-value metals. Some components are made of more valuable metals, like brass and copper, but they’re a small portion of the heater and won’t affect the price much.</p></div>

What is the best way to cut plexiglass?

• <div><p>This all depends on the tools you have on hand and whether you’re trying to cut a straight line or shapes. </p><p>The best tool to use for straight lines is either a circular saw or table saw. When cutting shapes, a jigsaw will be the easiest and most precise tool to use. </p></div>

Get matched with top welders in Cook, MN

Q: How do you cut rectangular ductwork?

• <div><p>Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. </p><p>Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. </p></div>

Q: Can you use a saw to cut metal pipe?

• <div><p>Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.</p></div>

Q: Are hot water heaters good for scrap metal?

• <div><p>Since water heaters are primarily made of metal, they&rsquo;re commonly accepted by scrap yards and collectors. Don&rsquo;t expect to fetch a high price, though&mdash;water heaters are mostly steel and aluminum, which aren&rsquo;t high-value metals. Some components are made of more valuable metals, like brass and copper, but they&rsquo;re a small portion of the heater and won&rsquo;t affect the price much.</p></div>

Q: What is the best thing to cut metal pipe?

• <div><p>The best thing to cut metal pipe is a durable pipe cutter that is made for metal. You may want to measure the diameter of the pipes before purchasing a pipe cutter to ensure it will be able to cut your metal pipes. Opt for a heavy-duty option to cut through metal like steel or cast iron.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Cook, MN?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Cook, MN

*The Angi rating for Welding companies in Cook, MN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Cook, MN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on September 15, 2024

Reviewed in September 2024
Showed up when he said he would. Did a great job. Efficient. Iâ d hire him again.
Steel Construction LLC
Request a quote
Reviewed in August 2023
Where do I begin? My son and daughter-in-law A/C stopped working in 100+ degree heat. They got 3 estimates. Company #1 said "replace the whole system; $16,000". Company #2 said "replace the whole system; $17,000". ASC Heating & Air came out and said, "you only need a few components replaced...
ASC Heating & Air
Request a quote
Reviewed in September 2022
Noah & Noah are absolutely amazing. I would definitely hire again. I have recommended them to multiple people in my area.
Noah and Noah's Tree Service LLC
Request a quote
Reviewed in August 2022
Kevin was very good about returning phone calls and handling all my concerns. His subcontractors were hard workers and performed quality work. His bid was not the cheapest bid, but the work was well worth the price. I would hire him again for other projects.
South Shore Construction Services Inc
Request a quote
Reviewed in October 2021
Jamie ,,,On time and on point
Range Water Conditioning
Request a quote
Reviewed in June 2021
Colin did some clean-up around the exterior of our cabin. He did an excellent job, was efficient, and very conscientious. We will use his services again, and highly recommend him.
Collins Cleaning Service
Request a quote
Reviewed in March 2021
Bernie did an excellent job on our retaining wall. He was on time, on budget and did excellent quality work. I highly recommend him.
Bernie's General Construction
Request a quote
Reviewed in October 2020
Communications through Dea Casey were always great and timely. The on site crew did not pick up all the debris as promised, and completion of the job was delayed because they ran out of materials.
Vertex Roofing, Inc.
Request a quote
Reviewed in June 2020
Very easy to coordinate with.
Hartway Painting And Wall Covering LLC
Request a quote
Reviewed in December 2019
Matthew helped me before he became a professional service povider. I've always trusted him to do exactly what he said. I've known him ten years. I trust him implicitly.
Carlson Home Service
Request a quote

Find Welders in Cook

Hampton Enterprise LLC

3.7(

)

Serving Cook, MN and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"I only use James when I need some work done to my house. He responds fast, gets the work done quicker than just about anyone else I've ever used and seems very concerned with leaving his customers happy."

Recommended by60%of homeowners

Request Quote

Welding questions, answered by experts

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

Since water heaters are primarily made of metal, they’re commonly accepted by scrap yards and collectors. Don’t expect to fetch a high price, though—water heaters are mostly steel and aluminum, which aren’t high-value metals. Some components are made of more valuable metals, like brass and copper, but they’re a small portion of the heater and won’t affect the price much.

The best thing to cut metal pipe is a durable pipe cutter that is made for metal. You may want to measure the diameter of the pipes before purchasing a pipe cutter to ensure it will be able to cut your metal pipes. Opt for a heavy-duty option to cut through metal like steel or cast iron.

This all depends on the tools you have on hand and whether you’re trying to cut a straight line or shapes.

The best tool to use for straight lines is either a circular saw or table saw. When cutting shapes, a jigsaw will be the easiest and most precise tool to use.

The Cook, MN homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Scott Dylan Westerlund
•
May 30, 2026May 30, 2026
How Much Does Sheet Metal Fabrication Cost? [2026 Data]
Get transparent sheet metal fabrication cost info for your project. Learn what impacts price, compare options, and plan your project with confidence.
Angi
•
Apr 4, 2026Apr 4, 2026
How Much Does Wrought Iron Railing Repair Cost? [2026 Data]
Get expert insights on wrought iron railing repair cost, including average prices, key cost factors, and tips to save on your next project.
Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Steel Beam Installation Company
Find the right steel beam installation company for your project. Learn what questions to ask, qualifications to check, and how to ensure structural safety.
Stacy Sare Cohen
•
May 22, 2026May 22, 2026
Melding Art and Skill: How to Hire a Qualified Welder
When you need help with a metal project and don’t have the expertise or the time, call an expert welder for your project. Here’s how to vet and hire a welder.
Jouviane Alexandre
•
May 3, 2026May 3, 2026
What is a Stair Stringer? Everything You Need to Know Before You Build
Stair stringers support every step you take. From wood to steel, open to closed—explore the different types, materials, and whether to DIY or hire a pro.