Get matched with top animal fencing pros in Clarissa, MN

A board on board fence is a type of privacy fence that uses overlapping vertical boards to keep onlookers from seeing into the fenced yard. Typically made of wood, board on board fences are more expensive than other privacy fences because they use more materials and require more complex construction.

There are two things you can do to make a fence replacement easier—but keep in mind that easier doesn’t mean better. First, you can use a jack or some other type of machinery to pull the post out of the ground. If that’s not available, a digging bar can help.

Second, you can backfill the hole with gravel rather than creating a concrete footing. Keep in mind, gravel is less secure. You should only use it if you’re installing a lightweight fence or have heavier, clay soil.

You can use pressure-treated wood for a horizontal fence, but you’ll need to purchase a thicker and higher-quality variety to ensure it doesn’t sag or warp after you install it. Use #2 pine grade lumber and boards and thicker dimensional lumber, such as a two-by-six. You’ll also need to use stainless steel or hot-dipped galvanized fasteners, as the chemicals in the treated lumber will cause regular galvanized fasteners to rust. 

You should dig a trench that’s 6 to 8 inches deep so that when the silt fence stands up, it has at least 6 inches below ground. It’s important to firmly bury your silt fence into the trench you’ve dug to keep water from running underneath the fence into the pile of soil you’re containing.