Get matched with top roofers in Barnesville, MN

Asphalt shingles are the least-expensive roofing material. They cost around $10,000 for a 1,600-square-foot home compared to $16,500 for metal roofing or $25,000 for slate shingles.

The roof overhang, also known as the eaves, does count as part of the roof’s square footage because it must be covered with the roofing material. The overhang is one of the reasons why you can’t base your roof's square footage on the square footage of the house. The roof square footage must also account for the pitch of the roof as well as the eaves.

The most common roof pitch is 4:12, which means a rise of 4 inches for every 12 inches of horizontal run. However, roof pitch varies widely based on roof design, climate, and even the roofing materials you plan to install. Your building type also plays a role, as flat roofs are common on commercial buildings and some modern homes.

The four types of roof sheathing are plywood, oriented strand board (OSB), planks, and tone-and-groove boards. The overwhelming majority of homes use the first two (especially OSB) and the other two are not often seen outside of special use cases. Methods of sheathing include solid sheathing, open sheathing where there are gaps, and plank sheathing. Most roofs are solid sheathing.