What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Top-rated countertop and backsplash pros.

Get matched with top countertop and backsplash pros in Aurora, MN

Q: Does Gorilla Glue work on laminate countertops?

• <div><p>Original Gorilla Glue is not a good choice for laminate countertops. It is not a contact cement, which is the best choice for this material, and it does not explicitly state that it should be used on laminate. Perhaps the best reason to avoid using Gorilla Glue on laminate is that it expands three times its original size, which could lead to your laminate being pushed away from the countertops.</p></div>

Q: Is painting your countertops a good idea?

• <div><p>Painting your countertops is a good idea if you want to spruce up your kitchen or bathroom without having to install brand-new counters. It's also cost-effective, and it's a project that most DIYers can take on. Since there are so many paint colors to choose from, you'll be able to easily customize your countertops to fit your home's aesthetic.</p></div>

Q: Can you put new countertops on old countertops?

• <div><p>Yes, it is possible to cover old countertops with new ones. Using a countertop overlay to cover your existing countertop is a good way to get a totally new surface without removing your old countertops. This method can be more cost-effective and less time-consuming than a total replacement.</p></div>

Q: What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian&reg; and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Q: How can I find a good countertop contractor?

• <div><p>Start your search for a reliable countertop contractor online, and look for companies that have high ratings from past customers. Check each of these companies on the Better Business Bureau website and rule out any that have a high number of complaints or an overall low rating. Next, contact the remaining companies and ask for a list of references and examples of past work. It&rsquo;s best to choose a provider that has references that are still pleased with the work years later and one that provides professional-looking examples of how it serves its customers.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your countertop and backsplash service project in Aurora, MN?

Select your specific project to find the pro for you.

Verified Reviews for Countertop And Backsplash Service pros in Aurora, MN

*The Angi rating for Countertop And Backsplash Service companies in Aurora, MN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Countertop And Backsplash Service needs.

*The HomeAdvisor rating for Countertop And Backsplash Service companies in Aurora, MN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Countertop And Backsplash Service needs.

Last update on June 15, 2026

Reviewed in June 2026
We are actually talking about Windows not roofing and Matt and Alex were wonderful to work with! They were funny, understanding and they seem to have true family values as so does the company.
DaBella - Duluth (Roofing/Windows)
Request a quote
Reviewed in September 2025
Pump out and minor repairs done quickly, efficiently and correctly. All personnel were friendly, efficient and well trained.
JBN, Inc.
Request a quote
Reviewed in December 2024
I recently had the pleasure of working with Richard Runston, I couldn't be more impressed with the results! From start to finish, the experience was seamless. The painter was professional, punctual, and attentive to every detail. They took great care in prepping the area, ensuring that...
Rich's Painting, LLC
Request a quote
Reviewed in June 2024
Kept me up to date on timing and date of job and followed thru, even tho weather was a factor in job. Would hire them again.
Foth's Top Notch Tree Service, LLC
Request a quote
Reviewed in April 2024
Had a plumbing issue that needed immediate attention, and the Pacific Remodeling Services came to the rescue. The plumber was knowledgeable, courteous, and had the problem fixed in no time. Will definitely be using them again!
Pacific Remodeling Services
Request a quote
Reviewed in April 2024
Virginia Wild Life Control exceeded my expectations when I had a stubborn rodent problem in my attic. Their technicians were highly skilled and conducted a detailed assessment of the situation. They implemented a tailored solution that effectively eliminated the rodents and prevented future...
Virginia Wild Life Control
Request a quote
Reviewed in October 2023
They were on time and professional. They listened to my needs and asked clarifying questions. And I felt cared for. This company will make it far if they keep up this level of service! I highly recommend using them for your next move!
KA Movers LLC
Request a quote
Reviewed in February 2023
Reliable and on-time. Fast and quality painting. Cleaned-up afterwards. We asked and appreciated their opinions on the paint colors we had chosen and they worked with us to obtain the visual results that we wanted. Really liked working with this company! Very professional and kind. Yes, will...
May Painting
Request a quote
Reviewed in September 2022
Excellent. Brandy does the job just like it is her own home with great attention to detail and leaving the site clean and tidy.
Handy Brandy LLC
Request a quote
Reviewed in June 2022
My basement had been damp for years, gradually became wetter and flooded this spring. Approve installed a sump pump which immediately flushed water when plugged in. They removed outside foundation plantings, an old tilted sidewalk all of which directed water into basement. They backfilled with...
Approve Plumbing, Inc.
Request a quote

Find Countertop and backsplash pros in Aurora

L & L Granite, LLC

5.0(

)

Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)

Serving Aurora, MN and surrounding areas

Approved

In business since 2009

Free estimates

Credit card accepted

"This guys were knowledgeable, professional, and left me with a clean wonderful kitchen! The countertop same as practically invisible."

Response time3 days

5 neighbors recently requested a quote

Recommended by100%of homeowners

Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)Stone Slab Countertops - Repair (Granite, Marble, Quartz, etc)

Serving Aurora, MN and surrounding areas

In business since 2021

Free estimates

Credit card accepted

"Nathan came out on a Saturday morning to measure our cabinets for countertops. He paid close attention to detail and it showed, they have the ability to scribe the countertops so they are nearly a perfect fit. The tops were an absolute perfect fit and followed the contour of our walls, no backsplash needed. Communication was perfect and once the project was complete they waited for us to get there to do a final walkthrough to ensure we were 100% happy. Would highly recommend LouAda for your countertops."

Response time10 mins

Response rate92%

Recommended by100%of homeowners

Request Quote

Marshall Handyman Services

4.1(

)

Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Aurora, MN and surrounding areas

In business since 2011

Free estimates

Credit card accepted

We are here for the sole purpose of helping you keep your home in tip top shape. We will meet with you free of charge and go over your project list and give you an estimate for each item separately so you can get things done that are the most important to you when it fits your budget. We have a crew of ten and look forward to serving you to make your home a comfortable place to be with everything working the way you want it to. Give us a call today for a free review of your list.

+19

Recommended by94%of homeowners

Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Aurora, MN and surrounding areas

In business since 2014

Free estimates

Credit card accepted

General Remodeling Residential and Commercial. Painting, framing, custom cabinets, flooring, roofing etc. We know some other competitors might be cheaper, but our main goal is to make customers satisfy. Plus our recent customers have great recommendations about our work.. We have been in business for 5yrs.. Free estimates

+10

Recommended by100%of homeowners

Request Quote

Flatau Construction

New to Angi

Laminate Countertops - InstallLaminate Countertops - RepairStone Slab Countertops - Install (Granite, Marble, Quartz, etc)

Serving Aurora, MN and surrounding areas

In business since 2011

Free estimates

Flatau Construction is an owner run and operated company with over 20 years experience. Our projects are clean, on time and on budget. Commercial and residential projects welcome. Call today for a free estimate.\n\n \n

Request Quote

K John Custom Homes and Remodlers

5.0(

)

Laminate Countertops - InstallSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)

Serving Aurora, MN and surrounding areas

In business since 2000

K John Custom Homes and Remodlers, room additions and remodels . We have been in business for over 7 years serving Minnesotta. We are family owned and operated. Our expertise assures your project coming in as budgeted. I We always take pride in our company name and we want you to rest easy knowing your home repair or remodeling job is in experienced hands. I would like to thank you in advance for considering K John Custom Homes and Remodlers and I look forward to working with you in the future.

Recommended by16%of homeowners

Request Quote

Countertops and Backsplashes questions, answered by experts

Original Gorilla Glue is not a good choice for laminate countertops. It is not a contact cement, which is the best choice for this material, and it does not explicitly state that it should be used on laminate. Perhaps the best reason to avoid using Gorilla Glue on laminate is that it expands three times its original size, which could lead to your laminate being pushed away from the countertops.

Painting your countertops is a good idea if you want to spruce up your kitchen or bathroom without having to install brand-new counters. It's also cost-effective, and it's a project that most DIYers can take on. Since there are so many paint colors to choose from, you'll be able to easily customize your countertops to fit your home's aesthetic.

Yes, it is possible to cover old countertops with new ones. Using a countertop overlay to cover your existing countertop is a good way to get a totally new surface without removing your old countertops. This method can be more cost-effective and less time-consuming than a total replacement.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Start your search for a reliable countertop contractor online, and look for companies that have high ratings from past customers. Check each of these companies on the Better Business Bureau website and rule out any that have a high number of complaints or an overall low rating. Next, contact the remaining companies and ask for a list of references and examples of past work. It’s best to choose a provider that has references that are still pleased with the work years later and one that provides professional-looking examples of how it serves its customers.

The Aurora, MN homeowners’ guide to countertop and backsplash services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Deirdre Sullivan
•
Jul 9, 2026Jul 9, 2026
How Much Do Caesarstone Countertops Cost? [2026 Data]
Are you getting close to deciding on Caesarstone® countertops for your home? Discover all the details behind Caesarstone® countertop costs in this guide.
Lawrence Bonk
•
Jul 9, 2026Jul 9, 2026
How Much Do Recycled Glass Countertops Cost? [2026 Data]
Recycled glass countertops have a distinct look. If you'd like some for your home, check out this guide to find out how much recycled glass countertops cost.
Nick P. Cellucci
•
Jul 8, 2026Jul 8, 2026
How Much Do Soapstone Countertops Cost? [2026 Data]
The cost of soapstone countertops varies primarily based on the size of the installation area, the color of the stone, and the type of edging.
Nicole Harris Bocianski
•
Aug 9, 2026Aug 9, 2026
10 Kitchen Remodeling Design Trends to Enhance Your Space
As you dream up your next kitchen remodel, take a look at some trending design ideas that can upgrade a space for both aesthetics and function.
Kate Fann
•
Jul 9, 2026Jul 9, 2026
Kitchen Backsplash Height Guide for Homeowners
The three most common backsplash heights are full, standard, and low. Learn about the different heights of kitchen backsplashes.
Caroline Gilbert
•
Aug 5, 2026Aug 5, 2026
9 Kitchen Backsplash Ideas for White Cabinets
White cabinets open up your backsplash options to virtually anything. Use this list of kitchen backsplash ideas for white cabinets to help you narrow it down.