Get matched with top dryer vent cleaners in Argyle, MN

While a professional can always help, there are some common plumbing culprits you can check yourself to see if you can find the sewer gas smell. For example, you should check your water traps, sometimes called P-traps and S-traps, which are located under sink, shower, and laundry drains. The wax ring beneath the base of your toilet, which creates a watertight seal with the plumbing, could also have gone bad.

A dryer vent inspection is simply the process of checking the vent for the possibility of damage or clogs. You can do it yourself or hire a pro. Pull the dryer away from the wall and inspect the portion of the vent that’s behind the appliance for lint buildup or kinks. Check the connection of the vent to the wall for loose parts or lint that’s escaping the vent. Check the exterior exhaust vent for signs of damage or lint blockage. A pro can check the length of the vent inside the wall for you. 

The length of an allowable dryer vent varies based on the local building codes and regulations. Typically, the maximum range is 25 to 35 feet. However, if the vent must have any 90-degree turns, you may see a reduction of five feet from the maximum. Some municipalities may have no specific maximum allowable length as part of the code. Typically, installers will run the vent over the shortest possible distance for safety. The dryer vent cleaning cost is less with a shorter vent length as well. 

Dryer vents commonly need to be replaced every one to three years. This will depend on the rate at which you dry loads, how often you clean your vent, and what type of vent you have. For instance, regular care will prolong the life span of most options, while aluminum foil vents may need to be replaced more frequently with or without regular maintenance.