Get matched with top chimney repair specialists in Wolverine, MI

Yes, you can repair cat scratches on leather furniture. A quick fix that won’t repair roughness is a leather recoloring balm that helps scratches blend in. Otherwise, use the following process.

1. Clean the area and trim loose fibers.

2. Rub leather binding glue all over the affected area.

3. Sand the area down with fine-grit sandpaper and clean off any residue.

4. Fill holes, scratches, and gouges with leather putty from a leather repair kit.

5. Sand the area down again and clean off any residue.

6. Apply leather colorant in several layers.

7. Seal the color in with a leather sealant and finish.

Murphy beds are no more or less comfortable than other types of beds because they can fit almost any kind of mattress. It’s possible to build a set-up with this iconic bed style that will provide comfort and please your particular sleep habits. One thing to keep in mind: The additional wear and tear of closing and opening your bed may reduce the life span of your mattress and make it more uncomfortable earlier on.

Fixing a drawer that is sticky, askew, or broken depends on the specific problem. Start by removing the drawer and examining the slides and tracks for any damage, bent parts, or loose hardware.

For minor issues:

• Clean and Lubricate: If the slides are just sticky, clean them and the corresponding tracks with a hot, damp cloth. Then, apply a lubricant like silicone spray or bar soap to help them glide smoothly. Also, check any roller wheels for problems.

• Tighten Screws: Tighten any loose screws on the slides and tracks. If screw holes are stripped, you may need to fill them and re-drill.

For more significant damage:

• Bent Hardware: If a slide is bent, you may be able to remove it, straighten it out, and reinstall it.

• Broken Parts: If a slide or track is broken or severely damaged, it will need to be replaced. Unscrew the damaged part and install a replacement that matches the type and size of the original.

After performing the repair, reinsert the drawer and test it to ensure it opens and closes smoothly, making any final adjustments for proper alignment. It can also be helpful to consult the manufacturer's guidelines for your specific drawer system.

There are a few reasons that a drawer won't come out. Most of the time, there's an obstruction of some sort preventing the drawer from acting normally. The key to figuring out the problem is investigation and patience. 

If possible, open the drawer as far as it will go and shine a flashlight inside to see if something in the drawer is hitting the cabinet frame. Or, remove a drawer above or below the offending one and use the flashlight to investigate the drawer slides. Discovering the cause will likely provide the necessary information to develop a solution.