Get matched with top woodworkers in Three Rivers, MI

Q: What tools and blades are needed to cut Corian?

• <div><p>Yes, Corian&reg; and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.</p><p>For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.</p><p>After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.</p></div>

Q: Is it easier to cut wood when it’s wet or dry?

• <div><p>Whether or not it&rsquo;s easier to cut wood when it&rsquo;s wet versus dry depends largely on the type of tool you use and the wood you&rsquo;re cutting. For example, a chain saw should still be able to cut through wet wood with relative ease, but it may be more difficult to maneuver due to the wood fibers sticking to the chains of the saw. </p><p>However, you might want to avoid cutting wood entirely when it&rsquo;s wet if you&rsquo;re pruning your tree. Sawing a wet tree that you don&rsquo;t plan on removing can also encourage bacterial and fungal growth and decay.</p></div>

Q: Why are carpenters so expensive?

• <div><p>Carpentry is a skilled trade and requires many years of experience to acquire the skills necessary to do the job efficiently and correctly. Because every home requires a carpenter at some stage of the building process, carpenters are typically in high demand. The higher the skill level, the higher the hourly rate the carpenter can charge.</p></div>

Q: Do joists sit on beams?

• <div><p>Joists do distribute their load to beams, but they don&rsquo;t sit on top of the beams. Instead, home builders nail or screw the joists directly to the beams such that the end of the joist butts up against the edge of the beam. Beams can sit on other beams for support, but you&rsquo;ll never see a joist sitting on top of a beam or another joist.</p></div>

Q: How much do floor joists cost?

• <div><p>If you&rsquo;re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Three Rivers, MI?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Three Rivers, MI

*The Angi rating for Woodworking companies in Three Rivers, MI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Three Rivers, MI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on June 14, 2026

Reviewed in June 2026
Garcias deserves 10 stars! No exaggeration. Brad and Winter are two very special people.....kindhearted, hard working, efficient, respectful, grateful and downright pleasant to chat with! We had a large shed clean out for them which got rained on several times, that made rugs, etc., heavier...
Garcias Removal Service
Request a quote
Reviewed in July 2024
Easy to work with. Affordable 10 out of 10 Wood recommend to a friend.
Skillful Solutions LLC
Request a quote
Reviewed in June 2024
i would recommend Michiana Timber ( Melvin Slabach ) He did an excellent job for us. Thank you Floyd & Phyllis Holm
Michiana Timber and Tree
Request a quote
Reviewed in November 2023
Aaron is a good man who does very good work . He painted our 157 year old barn, which is a big job and chose the right paints and methods to deal with unusual conditions. He colors inside the lines and cleans up when finished . I recommend him.
Aaron Brigham
Request a quote
Reviewed in October 2023
What a talented artist with wood. Have had several projects -- all of them 5 star worthy!
Helmuth Woodworks LLC
Request a quote
Reviewed in October 2023
Irish replaced vinyl siding, soffit, fascia and rain gutters on my home, including installation of hand-laid stone veneer on two exterior walls. They also replaced roofs for two sheds. Workmanship was excellent, price was very compeititive, communication was good. The project was completed on...
Stronghouse
Request a quote
Reviewed in July 2023
Sammy is a very polite young man that I hires to build a wood stove room cutting a 8 foot section out of my living room wall into my garage,tiled the floor and 5 foot up the wall( not the same tile) and for the rest of the wall was shiplap ( car siding and a window ,,, 2 can lights. ,,100%...
Sam's Remodeling & Repair, LLC
Request a quote
Reviewed in July 2023
Dream Finish Customs LLC did amazing work I would highly recommend them to anyone looking to get some drywall work done.
DREAM FINISH CUSTOMS LLC
Request a quote
Reviewed in July 2023
Work was done but had to have come back to shore up lattice as was not reinforced and it warped, so they came and added nails to it to hold in place.
Mr. Handyman of Kalamazoo-St. Joseph
Request a quote
Reviewed in August 2022
Donald High Construction is fantastic to work with. They finished the work in 2 days and quality of their craftsmanship was outstanding. I would definitely recommend this company to anyone who wants a job done well.
High Construction, LLC
Request a quote

Find Woodworkers in Three Rivers

Brown Construction Company

5.0(

)

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - Install+5 more

Serving Three Rivers, MI and surrounding areas

Approved

In business since 2014

Free estimates

Emergency services offered

"He does great work and is very professional!"

+14

Response time7 hrs

Response rate90%

Recommended by100%of homeowners

Carpentry Framing - Install

Serving Three Rivers, MI and surrounding areas

Approved

In business since 2014

Free estimates

Warranties offered

"They were on time and did a great job."

Response time4 days

Response rate100%

3 neighbors recently requested a quote

Request Quote

Logan Griffes Construction LLC

5.0(

)

Carport (Wood) - Build

Serving Three Rivers, MI and surrounding areas

Approved

In business since 2021

Free estimates

Emergency services offered

"For Concrete of any need -they should be your first Call/Text/Email For New Build - Call/Text/Email For Remodel - Call/Text/Email For Roofing and Gutters - Call/Text/Email For Pole Barns - Call/Text/Email Griffes Construction Inc. of Big Rapids does it all. They did Roofing and Gutters for us as well. We checked out references, and all of their expectations were exceeded. True Craftsmanship by the entire team."

+52

6 neighbors recently requested a quote

Recommended by100%of homeowners

Carpentry Framing - InstallCustom Cabinets - Build

Serving Three Rivers, MI and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

25 neighbors recently requested a quote

Custom Cabinets - Build

Serving Three Rivers, MI and surrounding areas

Approved

In business since 1950

Free estimates

Credit card accepted

MKD Kitchen and Bath (MKD) is a leading provider of kitchen and bathroom remodeling services in the Midwest, catering to both residential and commercial customers throughout Michigan. With over 74 years of experience, MKD is a second-generation family-owned and operated business that specializes in offering a range of remodeling services, including new cabinetry, countertops, cabinet refacing, outdoor kitchens, and installation services.

Response time6 hrs

Response rate100%

27 neighbors recently requested a quote

Request Quote

Honest Hand Construction

New to Angi

Arbor, Pergola or Trellis - Build Custom - For BusinessGazebo or Freestanding Porch - Repair - For Business

Serving Three Rivers, MI and surrounding areas

Approved

Free estimates

Emergency services offered

Small jobs welcome

Hi, I’m Josh, the owner of Honest Hand Construction, LLC. I take pride in delivering high-quality work at a price that makes sense for everyday people. I believe you shouldn’t have to choose between affordability and craftsmanship—you deserve both.

Request Quote

JBConstructors

New to Angi

Arbor, Pergola or Trellis - Build Custom - For BusinessGazebo or Freestanding Porch - Repair - For Business

Serving Three Rivers, MI and surrounding areas

Approved

Free estimates

Emergency services offered

Small jobs welcome

A young but experienced tradesmen with over 5 years under my belt.

Request Quote

Pac Man Construction

New to Angi

Arbor, Pergola or Trellis - Build Custom - For Business

Serving Three Rivers, MI and surrounding areas

Approved

In business since 2018

Free estimates

Credit card accepted

Pac Man Construction is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.\n

3 neighbors recently requested a quote

Request Quote

George Summerfield

New to Angi

Arbor, Pergola or Trellis - Build Custom - For BusinessGazebo or Freestanding Porch - Repair - For Business

Serving Three Rivers, MI and surrounding areas

Approved

Well rounded Carpenter/Handyman with over 20 years of experience. Can even handle small electrical and plumbing tasks as long as it doesn’t need licenses

Closet - BuildCustom Cabinets - Build

Serving Three Rivers, MI and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"quality is always excellent. Delivery has always been on time. this is the third time I have used Arkansas wood door"

Recommended by100%of homeowners

Request Quote

Showing 1-10 of 50

Woodworking questions, answered by experts

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

Whether or not it’s easier to cut wood when it’s wet versus dry depends largely on the type of tool you use and the wood you’re cutting. For example, a chain saw should still be able to cut through wet wood with relative ease, but it may be more difficult to maneuver due to the wood fibers sticking to the chains of the saw.

However, you might want to avoid cutting wood entirely when it’s wet if you’re pruning your tree. Sawing a wet tree that you don’t plan on removing can also encourage bacterial and fungal growth and decay.

Carpentry is a skilled trade and requires many years of experience to acquire the skills necessary to do the job efficiently and correctly. Because every home requires a carpenter at some stage of the building process, carpenters are typically in high demand. The higher the skill level, the higher the hourly rate the carpenter can charge.

Joists do distribute their load to beams, but they don’t sit on top of the beams. Instead, home builders nail or screw the joists directly to the beams such that the end of the joist butts up against the edge of the beam. Beams can sit on other beams for support, but you’ll never see a joist sitting on top of a beam or another joist.

If you’re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used.

The Three Rivers, MI homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Audrey Bruno
•
Jul 9, 2026Jul 9, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wood Stair Installation Contractor
Looking to hire a pro for wood stair installation? Learn how to find qualified contractors, questions to ask, and what to expect for your project.
Kristin Salaky
•
May 21, 2026May 21, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.
Kaitlyn Pacheco
•
May 21, 2026May 21, 2026
How to Waterproof Wood With 3 Simple Methods
Three effective ways to waterproof your wood and protect it from damage: hand-rubbed oil, sealant coating, and staining. Read on to learn how, step by step.