Get matched with top retaining wall installation pros in Sault Sainte Marie, MI

While vinyl is the least costly material for building a retaining wall, the most cost-effective method is to use wood or concrete blocks for a DIY retaining wall under 2 feet tall. Wood is inexpensive but lasts 20 years or more with care. Concrete can cost a little more but is stronger and will last longer with less maintenance.

If you've decided you'd like to skip the cost of restoring a brick exterior wall after considering whether you should repair or replace brick on your house, you can consider installing fiber cement siding over brick for a cost of $2 to $6 per square foot. When done properly, cement siding over brick offers a durable, low-maintenance option that can actually reduce your home's energy costs. It's also attractive. However, improper installation or installation over heavily compromised brick can cause water damage. 

Generally, a railroad tie retaining wall consisting of a single line of ties should be between 3 and 4 feet tall—and the height often tops out at around 6 feet. You can go taller, but you may need additional footings and reinforcements, including a second layer of railroad ties to support the added weight of the soil it’s holding back.

Railroad ties can be good for retaining walls, but it depends on the area. They have a desirable rustic look and are durable. The problem is they’re treated with creosote, a preservative the EPA says poses a risk to humans and wildlife. Over time, the preservative seeps out of the wood and into the ground. Many areas have banned the use of creosote-treated wood on residential properties. If your area does allow it, never use railroad ties near an edible garden or drinking water source. Instead, use wood that’s treated with an EPA-approved preservative or a wood-alternative composite material.