Get matched with top energy efficiency auditors in Pellston, MI

You can increase your home’s load factor by replacing fuse boxes with a circuit breaker, hiring a licensed electrician to upgrade your electrical panel, upgrading wiring, or installing subpanels. An electrical inspection by an expert can help determine the state of your current electrical systems and how they can be improved.

An average, 400-square-foot electric heated driveways consume approximately $3 per hour in terms of electricity. The price may slightly fluctuate depending on your local energy cost. A simple formula to calculate your heated driveway’s total wattage consumption is by multiplying the square footage by 50 watts and then dividing it by 1,000 to get the kilowatt number. Multiply that with your local energy cost per hour and there you have the hourly operating cost.

Blower door tests are measured in a few different ways, but the most popular are air changes per hour (ACH) and cubic feet of air (CFM) moving through the house per hour. A good ACH score is less than 2ACH, but 1ACH is better. This means the house experiences a total air change within 60 minutes (for 1ACH). For 2ACH, there’s a complete change every 30 minutes, and so on. CFM scores are similar in that a lower score means less air change, and therefore less leakage.

You can determine what size generator you need by listing the various appliances it will power during an outage. Write down the start-up watt usage, and then add them all together. 

A 7,500-watt generator will run your refrigerator, freezer, well pump, and lighting circuits without a problem. However, you’ll need an extra 3,000 to 4,500 watts to run your water heater and another 5,000 to 25,000 watts to run your electric furnace. In these instances, a whole-home generator is your best bet for running your critical equipment.