Get matched with top stone countertop pros in Lachine, MI

Yes, marble countertops are fairly soft and can scratch easily, especially compared to rival materials. However, most marble scratches are easy to repair, thanks to marble polish and repair kits. Deep scratches will require a professional.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Different types of engineered stone countertops require varying installation methods. The best option is to hire a countertop installer, especially if you are unfamiliar with the stone you plan to use. Generally speaking, quartz is the easiest for DIYers because you can cut it on site with a diamond blade and diamond hole saw. The average DIYer is unlikely to have the special tools to cut sintered stone countertops. Before diving into a project, make sure you have the experience and tools to do the job correctly.

Yes, but you will need the proper gas or electric lines running to the island. You will also need to factor in the costs of a range hood, also known as an extractor. There are several styles to choose from. An island extractor is a chimney-style range hood that hangs from the ceiling directly above your cooktop. A ceiling extractor fits flush into your ceiling above your cooktop, so it is less noticeable and allows for island extensions, such as hanging pot racks. 

For a completely unobtrusive hood, you can choose a downdraft extractor. It is built into the island and can be raised when needed. Its downside is that it takes up space in the island’s cabinets. A venting cooktop is built into the cooktop, and it too takes up cabinet space.