Get matched with top garage cleaning pros in Deckerville, MI

It’s possible to use a torch to melt ice on your garage door, but we don’t recommend it. It’s very easy to bring the flame too close to the door, which can melt the weather stripping or even the garage door itself. You’ll melt ice quickly with a torch, but the damage you’re likely to cause can end up costing you a few hundred dollars to fix, which isn’t worth it. Instead, we recommend pouring hot water over the frozen area or using a less intense heat source, like a hair dryer or space heater.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

Sheet metal garage doors, particularly steel and aluminum, have the cheapest materials and installation. Experienced homeowners may cut and shape the metal themselves; however, you can buy prefabricated metal from a hardware store or pay a metal fabricator to shape the metal to your specifications. Steel and aluminum garage doors can cost as little as $500 and go up to $3,000.

Most garage door rails are fitted for their garage door, in particular. Some manufacturers make adjustable rails, but they’re not universal.