Get matched with top door pros in Conklin, MI

You can attach the hinges to either the door or the frame first, depending on your preference. The order will not affect how the door hangs or the ease of installation. However, we recommend starting with the top hinge over the bottom one for stability, as it’s much easier to support the door from below while you install the top hinge. It will also be easier to pull the door outward from the hinges as it hangs from the top than it would be to push the door toward the hinges, as there’s less clearance on the lock side.

Sometimes, these two terms are used interchangeably, but they are separate parts of a door, and each serves a different function. The sill helps ensure the doorframe is secure, and the threshold helps protect the sill and direct water away from the door to prevent leaks.

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

Most modern, standard doors are 1 ⅜-inches thick, so you should aim for this thickness unless you're building a door to replace an antique door or fit into a non-standard wall opening. Thickness varies when installing a pocket door or sliding barn door, so a good rule of thumb is to measure your existing door, if possible. For standard doors, you can also measure from the inside of the door to the door stop to gauge the proper thickness.