What is the best way to cut plexiglass?

• <div><p>This all depends on the tools you have on hand and whether you’re trying to cut a straight line or shapes. </p><p>The best tool to use for straight lines is either a circular saw or table saw. When cutting shapes, a jigsaw will be the easiest and most precise tool to use. </p></div>

Can you cut a shipping container apart?

• <div><p>Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.</p></div>

How do I choose a metal fabricator?

• <div><p>Choosing the right metal fabricator for your project begins with research. Find a reputable fabrication company by searching for reputable contractors in your area, and then reviewing photos of their previous work, customer reviews, and photos of the company’s workshop.</p><p>Once you’ve narrowed down the list, contact the companies to ask about the types of metal fabrication projects they specialize and inquire about guarantees and warranties on workmanship. You should also ensure the company uses high-quality material, and ask about the schedule and turnaround time for your proposed project.</p></div>

Get matched with top welders in Baraga, MI

Q: How much do different welding projects cost?

• <div><p>Some welding projects, such as <a href="https://www.angi.com/articles/cost-to-repair-leaking-pipe.htm">repairing pipes</a> or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:</p><ul><li><p>Metal furniture repair: $35&ndash;$100</p></li><li><p>Pipe repair: $200&ndash;$1,000</p></li><li><p>Small gates: $550&ndash;$750</p></li><li><p>Fencing: $1,200&ndash;$1,800</p></li><li><p>Fabricated sheet metal welding: $750&ndash;$2,500</p></li></ul><p></p></div>

Q: How do you cut round ductwork?

• <div><p>Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.</p></div>

Q: Can you cut a shipping container apart?

• <div><p>Yes, but you&rsquo;ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around &frac34; inch thick, so it&rsquo;s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Baraga, MI?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Baraga, MI

*The Angi rating for Welding companies in Baraga, MI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Baraga, MI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on January 23, 2025

Reviewed in January 2025
PACC Solutions LLC did an excellent job on our roof. They tore off the old roof and installed a new roof which is great! They worked with our insurance and were very professional in all dealings with them. I couldn't recommend them more! Brian C. Lombard, IL
Pacc solutions llc
Request a quote
Reviewed in January 2025
PACC Solutions did a great job with our new roof and gutters. They worked with our insurance due to hail damage and we are very happy with the results. They are professional and courteous. I highly recommend them.
Pacc Building Group
Request a quote
Reviewed in May 2024
Excellent service. Very professional! I never seen anyone work as hard as he does. Everything was cleaned up. He is a perfectionist. I highly recommend him. I would definitely hire him again.
Newman Tree Service
Request a quote
Reviewed in April 2023
I couldnâ t give 5 stars for customer service because of a mix-up about date, price, etc. but once we got that straightened out, Herrera did a beautiful job, despite it being a cold and crummy day. I definitely recommend them - their work is great.
Herrera's Brick & Land Service, Inc.
Request a quote
Reviewed in October 2022
Vacuum repair that was desperately needed in our home. We brought it into the shop got a free estimate and no surprises and we had it back in three days. It was explained to us what was needed which we really appreciated and the work was done and the parts were installed and while we have a nice...
BISSONETTE'S SEW & VAC
Request a quote
Reviewed in August 2021
I felt really relieved to have the cleaning done and it was completely done right!
Strongs Cleaning Service
Request a quote
Reviewed in June 2021
I have been building and remodeling my home since 2017. It was time to have the rooms that were completed cleaned from top to bottom and so the call went out to Nikki. OCD is a perfect name for this company, not a corner left untouched, everything cleaned deeper and better than expected. I would...
OCD Cleaning & Odd Jobs
Request a quote
Reviewed in April 2021
Was not in my local area.
Onate Drywall - Home Facebook
Request a quote
Reviewed in July 2020
I hired them for a one-time cleaning after 3+ months of pandemic neglect. They did a fantastic job, on-time, efficient, put up with my barking dog and cleaned thoroughly from top to bottom. I highly recommend them.
Shine Mery Excellent Cleaning Service
Request a quote

Find Welders in Baraga

BURLEW FABRICATION LLC

5.0(

)

Serving Baraga, MI and surrounding areas

In business since 2025

Free estimates

Emergency services offered

"Asked Tony at Burlew fabrication of he could make me steel ladder racks for the side of my garage for pipe and ladders. Within 24 hours he had them welded up and installed them himself. Great work, very happy with them, would hire again!"

Response time7 hrs

Recommended by16%of homeowners

Request Quote

Hampton Enterprise LLC

3.7(

)

Serving Baraga, MI and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"I only use James when I need some work done to my house. He responds fast, gets the work done quicker than just about anyone else I've ever used and seems very concerned with leaving his customers happy."

Recommended by60%of homeowners

Request Quote

A&M mobile welding and fab

New to Angi

Serving Baraga, MI and surrounding areas

In business since 2012

A&M mobile welding and fab, LLC is a locally owned and operated company that values honesty and integrity in all aspects of its business. Our dedicated team of professionals that has over 8 years of hands on experience, to provide innovative ideas and suggestions tailored to your addition, remodel and custom building projects. Our services are customized to your individual needs, paying close attention to the details of each project that we are involved with. Please feel free to contact us today!

Request Quote

Welding questions, answered by experts

Some welding projects, such as repairing pipes or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:

Metal furniture repair: $35–$100
Pipe repair: $200–$1,000
Small gates: $550–$750
Fencing: $1,200–$1,800
Fabricated sheet metal welding: $750–$2,500

This all depends on the tools you have on hand and whether you’re trying to cut a straight line or shapes.

The best tool to use for straight lines is either a circular saw or table saw. When cutting shapes, a jigsaw will be the easiest and most precise tool to use.

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.

Choosing the right metal fabricator for your project begins with research. Find a reputable fabrication company by searching for reputable contractors in your area, and then reviewing photos of their previous work, customer reviews, and photos of the company’s workshop.

Once you’ve narrowed down the list, contact the companies to ask about the types of metal fabrication projects they specialize and inquire about guarantees and warranties on workmanship. You should also ensure the company uses high-quality material, and ask about the schedule and turnaround time for your proposed project.

The Baraga, MI homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Kelly Weimert
•
May 30, 2026May 30, 2026
How Much Does a Pipe Fence Cost? [2026 Data]
Pipe fencing is an extremely strong, durable option for containing horses and other livestock. This guide breaks down the factors that affect pipe fence cost.
Rachel Hoffman
•
May 30, 2026May 30, 2026
How Much Does Welding Cost? [2026 Data]
Get a clear estimate of welding cost for your next project. Learn what impacts welding prices, compare DIY vs. pro rates, and discover ways to save.
Angi
•
May 30, 2026May 30, 2026
How Much Does a Wrought Iron Railing Cost? [2026 Data]
Discover how much a wrought iron railing costs. Get detailed price breakdowns, installation factors, and tips to save on your new railing project.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wrought Iron Fence Installer
Learn how to hire a wrought iron fence installer with confidence. Find qualified pros, ask the right questions, and get expert tips for your project.
Paige Bennett
•
May 2, 2026May 2, 2026
What’s the Difference Between Cast Iron and Steel Wood Stoves?
Looking for the best home heating option that doesn’t require electricity? Check out the pros and cons of cast iron versus steel wood stoves.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Sheet Metal Fabrication Pro
Find and hire a qualified sheet metal fabrication pro for your project. Learn what to ask, how to vet pros, and what to expect from start to finish.