Get matched with top countertop and backsplash pros in Bad Axe, MI

Granite is one of the most popular options for countertops, and most homeowners believe that granite countertops are worth the money. Granite is more affordable than marble and quartz, and provides outstanding durability and longevity. Granite countertops are also desirable because they are entirely unique; unlike some other countertop materials, your granite slab won’t be identical to any others. Granite is porous, which means it has the potential to stain if you don’t clean up spills quickly, but the general durability and relatively low cost make it well worth the investment.

While epoxy resin is generally durable, it is not scratch-proof. Some sources state it is highly resistant to scratches from minor sources, while others note it can scratch and chip easily from sharper or heavier items. To prevent damage, always use a cutting board and avoid sliding heavy or rough-bottomed objects across the surface. If a scratch does occur, be aware that epoxy can be difficult to repair by sanding, often requiring an orbital sander for effective results.

Small kitchens benefit from simple, blunt countertop edges, as complicated edges can create visual clutter and be more of a hazard if you bump into them. Eased edges are a top pick for small kitchens because they are simple, do not jut out, and do not take up additional space. Bullnose edge countertops are also popular because of their rounded design; they are elegantly simple and will not be sharp when you bump against them. Single-beveled edges are also a good choice, as they look a little more upscale but still have rounded edges for safety and simplicity.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.