Get matched with top leather and vinyl repair specialists in Athens, MI

Although it isn’t recommended to use more than 1,500 pounds of force per square inch (or PSI) on delicate siding materials like wood and metal, it’s safe to use more than that on surfaces made of stone, cement, and, yes, vinyl. In most cases, you can use up to 3,500 PSI without any problems, though you’ll want to make sure to use a tip with a spray span that better disperses this pressure, like a green or yellow tip.

As you look for quotes for flooring repair, consider how the severity of the problem and the accessibility of the damage will impact your costs and budget.

Refinishing a few hardwood planks with minor scratches will cost thousands of dollars less than completely replacing an entire water-damaged floor. Likewise, a first-floor structural problem in a house with an unfinished basement is easy to access from below, while a similar issue on a second-story floor will require your flooring pro to remove several layers to get to the damage.

If there’s minimal buckling and it was caused by minor moisture damage, the planks may lay flat again once you’ve addressed the underlying issue. However, laminate floors that have experienced significant moisture damage won’t lay flat and must be replaced. If the issue only affects one or two boards, you can replace them yourself relatively easily. However, it’s best to call a pro if the problem is more widespread.

Through accurate measurements and dye matching to the original finishes.