Get matched with top woodworkers in Readfield, ME

Q: Can I cut or drill LVL beams?

• <div><p>It is not recommended to cut or drill into LVL (laminated veneer lumber) beams. As major structural components of a home, their composite structure can be compromised by alterations, which can weaken them and lead to cracking over time. If you must make modifications to an LVL beam, it is crucial to consult a structural engineer or general contractor first. A professional can advise on whether it's safe and provide specifics on the appropriate bit size, depth, and directionality for any necessary drilling.</p></div>

Q: What tools and blades are needed to cut Corian?

• <div><p>Yes, Corian&reg; and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.</p><p>For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.</p><p>After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.</p></div>

Q: How much do floor joists cost?

• <div><p>If you&rsquo;re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used. </p></div>

Q: How can I find ceiling joists using simple tools like a hammer or a nail?

• <div><p>Yes, you can find ceiling joists using simple tools if a stud finder isn't available.</p><p>Using a hammer requires patience and a keen ear. Gently tap the ceiling in a grid pattern, listening for sound changes. A hollow sound indicates space between joists, while a solid, dull thud suggests a joist. Mark the location with a pencil and confirm by tapping from different angles.</p><p>Alternatively, you can use a nail, but this method will leave small holes. You'll feel increased resistance when the nail hits a joist. Mark the spot and repeat the process every 16 or 24 inches to map the joist locations. This method is considered less reliable than using a stud finder.</p></div>

Q: What shouldn't you do with butcher block countertops?

• <div><p>There are several mistakes you should avoid when using butcher block countertops. Don't place hot pots or pans directly on the surface, as this can crack the wood and cause permanent damage. Avoid leaving wet items sitting on the surface, and wipe up liquids as soon as possible to avoid stains. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Readfield, ME?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Readfield, ME

*The Angi rating for Woodworking companies in Readfield, ME is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Readfield, ME is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on February 11, 2026

Reviewed in February 2026
Hired a new laminate floor put down in second bedroom. Had him paint kitchen walls and wood work, lot of patching done to walls before he could paint them, also had laundry room painted. Had him install new butcher block counter top in kitchen.
Edes Helping Hands
Request a quote
Reviewed in February 2025
This is a well-known business in the Vassalboro area. I've used them for tree work twice. I know 3 other people who have used them and were very happy. If needed, they have the skills to do complex tree work, near structures and power lines. Nice people. Easy to work with and competent.
Pro Tree Service, Inc.
Request a quote
Reviewed in January 2025
Best service and craftsmanship I’ve ever seen. Have hired Boynton builders for numerous jobs and would recommend them to anyone
Boynton Builders LLC
Request a quote
Reviewed in January 2024
Superb craftsmanship and attention to detail. Challenging project due to age of structure and length of time needs have existed. A pleasure to do business with this craftsman.
A.S. Painting & Projects
Request a quote
Reviewed in February 2023
They are the best! I hired them to paint the interior of my house. They have since installed flooring and turned an unused room into a laundry and half bath. I have many more projects and they will be the ones to complete them. I have gotten to know the crew so well I consider them family.
G Painting and Services, LLC
Request a quote
Reviewed in May 2022
This company is very hardworking, they want the job done right and I appreciate that as a homeowner. They recently washed our shed and wooden patio furniture as well as our siding on our home. They use quality products and for a relatively new small business they have a great reputation in our...
SK Softwashing
Request a quote
Reviewed in June 2021
I just had an awesome experience from start to finish with Kenneth! I hired someone first who was a disaster then Kenneth came to my rescue. He is prompt , reliable, fast, and very good with his follow up. He left a beautiful tile installation and was super clean in the entire process....
K.E. FLOORING
Request a quote
Reviewed in October 2020
AVOID AT ALL COST! Unbelievable what things were missing when delivery was made including 1 of 2 dressers filled with my wifes clothes and jewelry, a wood lathe, a band saw, 1 of 2 matching rocking chairs, an entire lodgepole pine queen bed, two high-end mountain bikes and more. The woodworking...
ProRelo, Inc.
Request a quote
Reviewed in November 2019
Jay work was fantastic, I am very pleased with the results of the painting to my kitchen, dining room, living room and hallway. He worked through to get the job done. I will have him back in a few months to do the bedrooms and now the woodwork since the flaws show next to the beautifully...
Barrett Pressure Washing
Request a quote

Find Woodworkers in Readfield

L&B Services

5.0(

)

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - Install+2 more

Serving Readfield, ME and surrounding areas

Approved

In business since 2014

Free estimates

Warranties offered

"Bob Oakes is an old school (meaning impeccable values and the job done correctly) contractor. He doesnâ t cut corners and communicates every step of the way. We were very pleased with his work and highly recommended him."

Response time12 hrs

4 neighbors recently requested a quote

Recommended by46%of homeowners

Carpentry Framing - InstallCustom Cabinets - BuildFurniture - Build Custom

Serving Readfield, ME and surrounding areas

Approved

In business since 1996

Free estimates

Offers commercial services

"We have used this business for numerous projects. They always deliver excellent work and are very flexible with some of our creative carpentry ideas. So far we have custom bookcases in three separate spaces, boot box, an old farmhouse staircase redo and we are hoping to do a full kitchen in the near future."

Response time2 days

Response rate95%

4 neighbors recently requested a quote

Request Quote

Tejada's Remodeling Inc

4.7(

)

Closet - Build

Serving Readfield, ME and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Warranties offered

"Highly recommended. Jose and Cesar were great. They were reliable and their work was excellent. They completely remodeled our condo including 4 bathrooms, floors, fireplace/hearth, etc. It was a big job and they worked with us to make sure everything came out exactly the way we wanted. The cost was very reasonable."

Response time2 days

Response rate100%

11 neighbors recently requested a quote

Request Quote

Jamie Adams Building, Remodeling, and Property Maintenance

4.8(

)

Closet - BuildInterior Trim and Decorative Moldings - InstallInterior Trim and Decorative Moldings - Repair

Serving Readfield, ME and surrounding areas

Approved

In business since 2010

Free estimates

Customers say: Quick response

"Jamie called me back within minutes of my first inquiry online. He arranged to come out the following day and provided a quote. He was able to complete the roofing job in one day, arrived early, and stayed onsite for the entire day. He was thorough , professional, and straight forward in his assessment . He completed the job in a timely and thorough manner, along with a very complete clean up prior to leaving. Jamie came in just under his quote . I would certainly have Jamie do more work here, and hope he can help us in the future."

Response time11 hrs

Recommended by100%of homeowners

Carpentry Framing - InstallCarpentry Framing - RepairCarport (Wood) - Build+6 more

Serving Readfield, ME and surrounding areas

Approved

Super Service Award Winner

In business since 2015

Free estimates

Emergency services offered

"Rep.laced entry door in storm door. Josh Arrived on time did what we agreed on.stayed within the estimate. sound craftsmanship quality work well done. Thanks Josh"

+104

Response time1 day

Response rate100%

4 neighbors recently requested a quote

Request Quote

The Golden Rule Handyman, LLC

4.4(

)

Carpentry Framing - RepairGazebo or Freestanding Porch - RepairInterior Trim and Decorative Moldings - Install+2 more

Serving Readfield, ME and surrounding areas

Approved

In business since 2013

Free estimates

Emergency services offered

"Mike was very pleasant and did a wonderful job painting my bathroom. Also put up some trim in entranceway. I have more work that needs to be done and will be calling him."

Response time2 days

Recommended by96%of homeowners

Request Quote

A.G. Construction, LLC

4.8(

)

Carpentry Framing - InstallCarpentry Framing - RepairWood Stairs and Railings - Install or Replace

Serving Readfield, ME and surrounding areas

Approved

In business since 2010

Free estimates

Offers commercial services

"Solid job. Pleased with the finished product"

+27

Response time2 days

1 neighbors recently requested a quote

Recommended by100%of homeowners

Request Quote

Innovative Construction

3.7(

)

Carpentry Framing - InstallCarpentry Framing - RepairCarport (Wood) - Build

Serving Readfield, ME and surrounding areas

Approved

In business since 2015

Free estimates

Emergency services offered

"I hired innovative construction to reside one side of my building. During the bidding of the project as well as during the execution of the work, Greg and his team were professional, timely and responsive. I would absolutely hire Greg and his team again"

Response time3 days

13 neighbors recently requested a quote

Recommended by45%of homeowners

Interior Trim and Decorative Moldings - InstallInterior Trim and Decorative Moldings - RepairWood Stairs and Railings - Repair

Serving Readfield, ME and surrounding areas

Approved

In business since 2024

Free estimates

Emergency services offered

"Great professional service. Explained everything answered my questions. The work was excellent. Cleaned up after they finished."

+15

3 neighbors recently requested a quote

Request Quote

G.A. Doughty Construction

3.4(

)

Carpentry Framing - RepairCarpentry Framing - InstallWood Stairs and Railings - Install or Replace+1 more

Serving Readfield, ME and surrounding areas

Approved

In business since 2003

Free estimates

Credit card accepted

"My job was extremely small, just repairing squirrel damage to the flashing around our chimney. They were extremely prompt in responding and did a great job for an extremely reasonable price. I am very appreciative."

Response time1 day

19 neighbors recently requested a quote

Recommended by57%of homeowners

Request Quote

...

Showing 1-10 of 191

Woodworking questions, answered by experts

It is not recommended to cut or drill into LVL (laminated veneer lumber) beams. As major structural components of a home, their composite structure can be compromised by alterations, which can weaken them and lead to cracking over time. If you must make modifications to an LVL beam, it is crucial to consult a structural engineer or general contractor first. A professional can advise on whether it's safe and provide specifics on the appropriate bit size, depth, and directionality for any necessary drilling.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

If you’re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used.

Yes, you can find ceiling joists using simple tools if a stud finder isn't available.

Using a hammer requires patience and a keen ear. Gently tap the ceiling in a grid pattern, listening for sound changes. A hollow sound indicates space between joists, while a solid, dull thud suggests a joist. Mark the location with a pencil and confirm by tapping from different angles.

Alternatively, you can use a nail, but this method will leave small holes. You'll feel increased resistance when the nail hits a joist. Mark the spot and repeat the process every 16 or 24 inches to map the joist locations. This method is considered less reliable than using a stud finder.

There are several mistakes you should avoid when using butcher block countertops. Don't place hot pots or pans directly on the surface, as this can crack the wood and cause permanent damage. Avoid leaving wet items sitting on the surface, and wipe up liquids as soon as possible to avoid stains.

The Readfield, ME homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Audrey Bruno
•
Jul 9, 2026Jul 9, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wood Stair Installation Contractor
Looking to hire a pro for wood stair installation? Learn how to find qualified contractors, questions to ask, and what to expect for your project.
Kristin Salaky
•
May 21, 2026May 21, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.
Kaitlyn Pacheco
•
May 21, 2026May 21, 2026
How to Waterproof Wood With 3 Simple Methods
Three effective ways to waterproof your wood and protect it from damage: hand-rubbed oil, sealant coating, and staining. Read on to learn how, step by step.