Top-rated floor polishers.

Get matched with top floor polishers in Milbridge, ME

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Milbridge, ME?

Select your specific project to find the pro for you.

Find Floor polishers in Milbridge

Avatar for New England Home Renovations LLC
New England Home Renovations LLC
4.0(
311
)
Clean & Polish Flooring - For Business

Serving Milbridge, ME and surrounding areas

In business since 1983

Free estimates

Emergency services offered

"Everything went wonderfully with this company.  They were very professional, listened to exactly what my problem was, and explained to me how they were going to diagnose the problem and/or solve it before doing any actual work.  Once they started, the team (three people came) worked together like a well-oiled machine.  One was in the room with diagnostics, one was at the fuse box looking for possible problems there, and the third went into the crawlspace beneath our house to look at the physical wiring.  Once the problem was found (there was a faulty wire beneath the house that had come loose from the junction box), it was fixed and tested within minutes and another full diagnostic was done to make sure there were no other possible issues.  They cleaned up after themselves very neatly.  They also replaced the light switch with a dimmer switch at no extra cost!  Well within my budget, and came in even lower than their original (FREE) estimate!  I would highly recommend this company to anyone in the Bergen County area.
"
Before
After's
New boiler install
Removal of cast Iron to PVC.
Additional Photos

+37

Recommended by89%of homeowners
Floor Polishers questions, answered by experts

You can use dish soap mixed with warm water to clean just about any type of flooring, and while vinegar is a great addition to some floor cleaners, it’s not a good idea to use it on wood flooring or engineered wood flooring. Vinegar is very acidic, and it can gradually eat away at the protective finish on wood floors. If you’re cleaning laminate, tile, concrete, or vinyl floors, feel free to use vinegar and water in a 1-to-1 ratio with a few drops of dish soap. For wood floors, substitute the vinegar for olive oil.

Yes, polished concrete floors are worth it for homeowners who want durability, style, and low maintenance in one sleek flooring surface. You get the modern visual appeal of stone or tile with far less upkeep and far less cost. Polished concrete flooring is tough enough for high-traffic areas, it’s a great choice for people with allergies, and it’s easy to clean. If your existing concrete is in good shape, polishing it can give you solid value that shines on for years.

If you have waxed floors or floors with a penetrating stain or oil, you can shine them up with some more wax and a cloth or floor buffer. After cleaning the floor thoroughly, apply wax to the floor in small sections and use a clean, dry cloth or towel to buff it until it shines. You can also use an electric polisher, which is especially handy for large floors.

The answer to this question depends on how large the room is and how much experience you have stripping and waxing floors. It will take at least 24 hours to strip the floors, then you must allow time for drying, waxing, waiting for them to cure, and, finally, buffing them. Since you likely will not be working for the full 24 hours, it is safe to say that this is a two- or three-day job.

Suggesting regular dusting and spot cleaning to maintain freshness.

The Milbridge, ME homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.