Get matched with top structural engineers in Lisbon, ME

Q: Can I cut or drill LVL beams?

• <div><p>It is not recommended to cut or drill into LVL (laminated veneer lumber) beams. As major structural components of a home, their composite structure can be compromised by alterations, which can weaken them and lead to cracking over time. If you must make modifications to an LVL beam, it is crucial to consult a structural engineer or general contractor first. A professional can advise on whether it's safe and provide specifics on the appropriate bit size, depth, and directionality for any necessary drilling.</p></div>

Q: What are the disadvantages of a cathedral ceiling?

• <div><p>Cathedral ceilings make a statement in your home, but at the cost of your attic space. Normal attics are wide open, which allows warm air to move around and exit your home. Because of this, cathedral ceilings make your home less energy efficient and put your ceiling at risk of venting issues if you&rsquo;re not careful. They also reduce your attic storage space, potentially cause an echo, and even make it harder to change a light bulb. </p></div>

Q: Why are studs 16 inches apart?

• <div><p>In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called &quot;on-center&quot; and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called &quot;advanced framing&quot;. This requires careful planning and adherence to local building codes to ensure structural integrity. </p></div>

Q: How do I know if cracks are structural?

• <div><p>The best way to determine if ceiling cracks are structural is to hire a ceiling contractor to inspect the cracks and provide a professional opinion. That said, you might be able to make an educated guess based on the size and appearance of the crack. Larger cracks, cracks accompanied by sagging or discoloration, and cracks that travel from the ceiling down the walls are all signs of structural issues.</p></div>

Q: What building codes apply to spiral staircases?

• <div><p>Building codes for spiral staircases will vary by your location. Most local codes will specify minimum tread width, riser height, handrail requirements, and headroom. These standards help ensure safety and accessibility for all users. Always check local codes before you begin the installation to ensure compliance and avoid costly modifications or fines.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Lisbon, ME?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Lisbon, ME

*The Angi rating for Structural Engineering companies in Lisbon, ME is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Lisbon, ME is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on August 17, 2025

Find Structural engineers in Lisbon

Solid Framing Engineering, LLC

5.0(

)

Serving Lisbon, ME and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Small jobs welcome

"Jacob Schott of Solid Framing Engineering was/is phenomenal is his support as a structural engineer. Mr. Schott listened, and heard, what the requirements were. He proposed acceptable, structurally engineered solutions in a timely, professional and thorough manner. We hired Jacob Schott of Solid Framing Engineering to aid in ensuring that residential new build actions would adhere to structural safety & longevity standards. Our requirements consisted of a rather large deck, a bridge (12?x29?) with a cover/portico section and exaggerated soffits. All these requirements were in Mid-coast Maine where significant winds, attacking from various directions, are prevalent and cause for multi-axis planning to control potential environmental considerations. Mr. Schott continued to provide engineering advice/direction after the sub contractor failed to adhere to specifications and induced the need for modified engineering solutions?even after having concluded the initial scope of work."

Response time1 day

9 neighbors recently requested a quote

Request Quote

Structural Engineering questions, answered by experts

It is not recommended to cut or drill into LVL (laminated veneer lumber) beams. As major structural components of a home, their composite structure can be compromised by alterations, which can weaken them and lead to cracking over time. If you must make modifications to an LVL beam, it is crucial to consult a structural engineer or general contractor first. A professional can advise on whether it's safe and provide specifics on the appropriate bit size, depth, and directionality for any necessary drilling.

Cathedral ceilings make a statement in your home, but at the cost of your attic space. Normal attics are wide open, which allows warm air to move around and exit your home. Because of this, cathedral ceilings make your home less energy efficient and put your ceiling at risk of venting issues if you’re not careful. They also reduce your attic storage space, potentially cause an echo, and even make it harder to change a light bulb.

In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.

The best way to determine if ceiling cracks are structural is to hire a ceiling contractor to inspect the cracks and provide a professional opinion. That said, you might be able to make an educated guess based on the size and appearance of the crack. Larger cracks, cracks accompanied by sagging or discoloration, and cracks that travel from the ceiling down the walls are all signs of structural issues.

Building codes for spiral staircases will vary by your location. Most local codes will specify minimum tread width, riser height, handrail requirements, and headroom. These standards help ensure safety and accessibility for all users. Always check local codes before you begin the installation to ensure compliance and avoid costly modifications or fines.

The Lisbon, ME homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Lyle Hendriks
•
May 5, 2026May 5, 2026
How Much Does Beam Installation Cost [2026 Data]
Beam installation costs are an important consideration if you’re building a home or doing renovations. Learn about average costs and factors in this guide.
Haley Nothstein
•
May 30, 2026May 30, 2026
How Much Does It Cost to Replace a Main House Support Beam? [2026 Data]
A damaged main support beam can cause serious structural damage to your house. Learn how much it costs to replace a main house support beam.
Alison Kasch
•
Apr 4, 2026Apr 4, 2026
How Much Does It Cost to Remove a Load-Bearing Wall? [2026 Data]
Do you have a load-bearing wall standing between you and your projects that you want to remove? Learn about the cost of removing a load-bearing wall.
Dan Simms
•
Mar 19, 2026Mar 19, 2026
6 Tips on How to Build an Earthquake-Proof House
Knowing how to build an earthquake-proof house can reduce the risk of home collapse and damage. Follow these tips to protect your home.
Dan Simms
•
Apr 9, 2026Apr 9, 2026
Why You May Need to Hire a Structural Engineer for a Home Inspection
Learn why it might be a good idea to hire a structural engineer for a home inspection in addition to a general home inspector when you’re purchasing a home.
Kate Fann
•
Mar 19, 2026Mar 19, 2026
Who Do You Hire to Knock Down a Wall?
Looking to open up your living space and need to remove a wall? Learn who to hire to knock down a wall, whether it's load-bearing or non-load-bearing.