Top-rated painters.

Get matched with top painters in Jackman, ME

Enter your zip and get matched with up to 5 pros

Need a pro for your painting project in Jackman, ME?

Select your specific project to find the pro for you.

Find Painters in Jackman

Avatar for Aqua Terra Blasting
Aqua Terra Blasting
5.0(
7
)
Exterior Home or Structure - Paint or StainExterior Home or Structure - Paint or Stain: Large

Serving Jackman, ME and surrounding areas

In business since 2017

Free estimates

Emergency services offered

"Andy did an excellent job of cleaning 20 years of bottom paint off the bottom of my 21 foot fiberglass boat. Paint was removed to the boot stripe and there was no damage to the glass. The work was completed in my yard which was left clean with no residue. Great job"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+14

Recommended by100%of homeowners
Avatar for New England Home Renovations LLC
New England Home Renovations LLC
4.0(
311
)
Exterior Home or Structure - Paint or StainExterior Home or Structure - Paint or Stain: LargeInterior Home or Surfaces - Paint or Stain+7 more

Serving Jackman, ME and surrounding areas

In business since 1983

Free estimates

Emergency services offered

"In summary I have to say Richard was  excellent!  He came when he said he would and finished the work when he said it would be finished.  As I solicited multiple bids for the work NE Renovations was among the most competitive.  As the work was completed I was so pleased I ended requesting he come back to do additional jobs.  He was very accomadating and even explained various options on how best to accomplish the additional work.     
"
Before
After's
New boiler install
Removal of cast Iron to PVC.
Additional Photos

+37

Recommended by89%of homeowners
Showing 1-10 of 30
Painting questions, answered by experts

Yes, you can limewash surfaces other than brick. Plaster, stone, stucco, and concrete can all also be limewashed. Any porous surface that will absorb the wash is a good candidate for limewash, although it won’t help much with waterproofing. If you choose to limewash over paint, you’ll need to prep before applying it to avoid a powdery, chalky finish. Shiny surfaces like metal or glass can’t absorb limewash, so it’s not suited for these.

Yes, you can and should paint or stain pressure-treated wood, as this helps prevent the surface from cracking. However, it is crucial to wait for the wood to dry out completely from the chemical treatment process before applying a finish. If the wood is still wet, the paint will not adhere properly. The drying time can range from weeks to six months. To test if the wood is ready, drip some water onto a board. If the water is absorbed, the wood is dry enough for painting or staining. If the water beads up on the surface, it needs more time to dry. You can build with the wood while it's still wet, but you must wait for it to dry before painting.

The general consensus is that two coats of stain are required and since the cedar is siding, a third coat of sealant is always a good idea. This helps protect the wood and stain, so you won’t need to resand and restain for at least a decade. Each stain after the first will darken the wood, so be aware of that when choosing a colored stain.

100% acrylic latex lasts the longest for most siding. Premium 100% acrylic products carry lifetime warranties against peeling, blistering, and fading. Match the grade to your surface and climate for the best lifespan.

You can apply stain over peeling stain, but it’s not a good idea. Your old stain will get in the way of your new stain bonding to the wood, so you’re likely going to see the same issue again shortly after application. Your best option is to sand off the old stain and clean the surface thoroughly before applying new stain.

The Jackman, ME homeowners’ guide to painting services

From average costs to expert advice, get all the answers you need to get your job done.