Top-rated deck staining pros.

Get matched with top deck staining pros in Canaan, ME

Enter your zip and get matched with up to 5 pros

Need a pro for your deck staining project in Canaan, ME?

Select your specific project to find the pro for you.

Find Deck staining pros in Canaan

James Dickson
New to Angi
Exterior Home or Structure - Paint or StainExterior Home or Structure - Paint or Stain: LargeExterior Home or Structure - Paint or Stain: Medium

Serving Canaan, ME and surrounding areas

Approved

hey there- My name is Jamie Dickson- i'm actually a senior pastor at a central maine church. Before pastoring I started one of the larger more successful painting companies in maine and before that worked with Sherwin williams company closely with product and specialty knowledge on job sites. Currently just looking for small jobs to help pay for my kids tuition to school. thanks!

Highland Painting Co.
New to Angi
Exterior Home or Structure - Paint or Stain: MediumExterior Home or Structure - Paint or StainExterior Home or Structure - Paint or Stain: Large

Serving Canaan, ME and surrounding areas

Approved

Highland Painting, a quality painting company that serves in the greater Bangor area. Efficiency, professionalism and attention to detail is very important us. We do interior and exterior jobs, new builds, repaints and stains. No job is too big or small, we do it all! Contact us at [email protected] or call 207-855-1252

6 neighbors recently requested a quote
...
Showing 1-10 of 70
Deck Staining questions, answered by experts

The general consensus is that two coats of stain are required and since the cedar is siding, a third coat of sealant is always a good idea. This helps protect the wood and stain, so you won’t need to resand and restain for at least a decade. Each stain after the first will darken the wood, so be aware of that when choosing a colored stain.

Yes, you can and should paint or stain pressure-treated wood, as this helps prevent the surface from cracking. However, it is crucial to wait for the wood to dry out completely from the chemical treatment process before applying a finish. If the wood is still wet, the paint will not adhere properly. The drying time can range from weeks to six months. To test if the wood is ready, drip some water onto a board. If the water is absorbed, the wood is dry enough for painting or staining. If the water beads up on the surface, it needs more time to dry. You can build with the wood while it's still wet, but you must wait for it to dry before painting.

Avoid using cleaning products that are abrasive or contain bleach or acidic components on composite decking to avoid discoloration. Early-generation Trex decking isn’t designed to handle pressure washer cleaning—and if you use them on second-generation boards, always use a low setting to avoid the risk of damage that can risk voiding your warranty.

Painting a damaged pool deck is not recommended if the substrate is crumbling, cracking, spalling, or otherwise actively deteriorating. Continuing deterioration will result in the paint also delaminating or flaking off the damaged surface. Minor damage such as chips or hairline cracks that are not actively deteriorating can often be repaired enough to paint over. A damaged pool deck with a lot of cracking and deterioration should be replaced for best results.

Here's the deal with leaving used rags covered in oil-based stain lying around in a pile: Depending on the conditions, these rags can take just an hour or up to a few days to combust. The source of ignition is caused by trapped heat that can be compounded if the rags are near a heat source.

The Canaan, ME homeowners’ guide to deck staining services

From average costs to expert advice, get all the answers you need to get your job done.