Get matched with top bathtub restoration pros in Fort Kent, ME

Resurfacing a bathtub is less expensive than replacing one. Resurfacing a tub costs about $330 to $630, depending on the material, while replacing a tub costs an average of $4,150. But remember that resurfacing is a temporary solution for a worn-out tub, and you may need to refinish a tub every few years to keep it looking new.

Surprisingly, cleaning an air bath is almost as easy as relaxing in one. Most air baths have a self-cleaning or drying cycle to remove moisture from the inner tubing. This prevents mold and keeps the tub ready for your next soaking session. For deeper cleaning, use mild soap and a soft cloth to wipe the surfaces and periodically clean the air jets as the manufacturer recommends.

As with any project, refinishing your bathtub presents pros and cons to consider, such as:

Pros

• The job is typically quick, and your tub is ready within 48 hours.

• Your bathtub looks new.

• You don’t need to tear out the old tub and replace it with a new one.

• You can customize it with the color of your choice.

• You can’t tell the bathtub has been refinished.

Cons

• Refinished bathtubs can be slippery.

• Not all refinishing products are created equal.

• You need to wait up to 48 hours before using the bathtub.

Before you begin caulking a shower, you’ll need to use a utility knife or solvent to remove the old caulk and inspect the area for mold. If needed, take appropriate steps to get rid of the mold, then wipe everything down with dish soap and warm water before letting it dry completely. Finally, surround the caulking area with two strips of blue painter’s tape—one above the joint where you’re caulking and another below it.