Top-rated deck cleaning pros.

Get matched with top deck cleaning pros in Canaan, ME

Enter your zip and get matched with up to 5 pros

Need a pro for your deck cleaning project in Canaan, ME?

Select your specific project to find the pro for you.

Find Deck cleaning pros in Canaan

Avatar for Aqua Terra Blasting
Aqua Terra Blasting
5.0(
7
)
Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Canaan, ME and surrounding areas

In business since 2017

Free estimates

Emergency services offered

"Andy did an outstanding of stripping 150 years of paint off the Marshall Point Light in Port Clyde, Maine. The metal was taken down to bright with all paint and extensive rust being removed. This was coordinated with the painters who primed it as soon as it dried. All residue was caught and collected in tarps for proper disposal. No dust was produced. The brickworks and granite blocks were also cleaned down to original surface for priming and recoating. The job was completed timely despite inclement weather. I highly recommend Andy and Aqua Terra for any such project."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+14

Recommended by100%of homeowners
Avatar for wedoitpropertycare
wedoitpropertycare
5.0(
2
)
Deck, Fence, Patio or Porch - Clean and Seal

Serving Canaan, ME and surrounding areas

Free estimates

Emergency services offered

Warranties offered

we specialize in lawncare but so many services to offer for property care.At we do it we offer clean ups,clean outs,junk removal,light tree work,tractor work and property maintenance and repairs for residential and commercial homes,camps and rentals and capiable of more that is needed.

POST construction Facebook
4.3(
12
)
Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Canaan, ME and surrounding areas

In business since 2020

Free estimates

Emergency services offered

"Justin was very professional, competent and thorough. He took pictures of the the issues with my skylight so that I could fully understand the problem and set up a time the very next day to repair it. He was very fair in his pricing and his communication was excellent. He knows what he is doing and does it in a very timely manner. I would also give him high marks for his accountability and promptness. I will definitely hire him again."
Response time1 day
Recommended by90%of homeowners
Showing 1-10 of 31
Deck Cleaning questions, answered by experts

Yes, deck footings typically require an inspection before laying down concrete. While not all local building codes require footing inspection, proper placement ensures a safe and structurally sound deck. An inspector will verify that the deck can adequately hold what you put on top of it., and that the footings have been dug to the correct dimensions.

Most building codes require that spindles or balusters on deck and stair railings be spaced no more than four inches apart. This safety standard, often called the '4-inch sphere rule,' is designed to prevent small children or pets from slipping through the railing. A good way to visualize this is that a 4-inch sphere should not be able to pass between two spindles. For the same safety reason, the space between the bottom rail and the deck floor should also be no more than four inches. As a general guideline, professionals often install three balusters per foot of railing. However, since specific requirements can vary by location, it is crucial to check your local building codes to ensure compliance before starting your project.

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

Composite decking requires a solid foundation, substructure, or subframe to ensure stability. This base is typically composed of posts, beams, joists, and footings. The frame's joists can be built from various materials like composite, plastic, timber, or metal, as long as the base can support the deck's weight without shifting. A professional deck builder might recommend installing the frame on a solid concrete base for added durability. The final design and materials for the substructure will depend on your budget, the type of deck, and environmental conditions.

It’s best to prime composite decking before painting. This promotes better paint adhesion, helps create a smooth finish, and can mean the paint job will last longer. Always follow the manufacturer’s instructions for application, allow ample primer drying time before painting (typically 24 to 48 hours), and thoroughly clean the deck boards to promote the best adhesion.

The Canaan, ME homeowners’ guide to deck cleaning services

From average costs to expert advice, get all the answers you need to get your job done.