Get matched with top siding pros in Sharptown, MD

The lifespan of siding ranges from 20 to over 100 years, depending heavily on the material, climate, quality of installation, and maintenance.

• Vinyl, Wood, and Aluminum: Typically last 20 to 40 years. Engineered wood may need replacement after just 20 years.

• Fiber Cement: Lasts around 50 years.

• Brick and Stone: These are the most durable, lasting for a century or more with proper care.

The longevity of any siding can be shortened if it's not properly maintained or if damage is not repaired promptly. Regular cleaning is vital. It's time for a replacement when you see widespread damage, signs of water intrusion, or a spike in energy costs.

Clapboard siding is traditionally made of wood, and is one of the most common types of wood siding in North America. When people talk about wood siding, they are usually talking about clapboard siding. However, not all wood siding is in the clapboard style: It can be tongue-and-groove, shake, and other designs. Also, clapboard siding can sometimes be made of different materials, like vinyl or fiber cement, so the terms are not interchangeable.

Many people remove aluminum siding to get to the wood underneath, allowing them to paint, stain, or finish the wood to give the home a brand-new aesthetic. With that in mind, you find plywood and related types of wood underneath aluminum siding, but you also run into fiber cement board, strand board, and a diverse array of other building materials. It depends on the original design of the house. 

You should plan to stain or refinish your home's cedar siding every three to seven years to maintain its appearance and provide maximum protection, though some estimates suggest a range of four to six years. The exact frequency depends on several factors, including your local climate, exposure to severe weather like direct sunlight, rain, and wind, the quality of the initial stain application, the type of stain used, and the overall condition and quality of the wood.

For homes in harsh climates with high humidity and significant sun exposure, you should plan on staining as often as every three years, while those in milder locations may only need to do so every seven years. For the longest-lasting protection in particularly harsh climates, consider using an opaque stain.

If you are looking for a lower-maintenance alternative, you might consider vinyl or aluminum siding. While the initial installation cost can be higher, they do not require as much upkeep and can offer more value over time, especially in areas with excessive rainfall or high humidity.