Get matched with top carpenters in Oakland, MD

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

"Within days of purchasing the deal, I received the instructions and paper to draw my table templates. The table has 2 drop leaves plus 2 additional leaves that can be inserted in the table. The templates were pretty easy to draw. The finished pads were delivered in a very short time. They fit the table and each of the 4 leaves perfectly and magnetically lock together to keep them aligned when on the table. A year and a half later, I still love these pads."

"Painters arrived exactly on time and accomplished all tasks the same day. The manually stripped the deck and applied two coats of stain. They carefully cleaned and then painted the foundation concrete as it had got dirty over the years. They also scraped, caulked and painted a large bump-out window off our living room.
"

"I am a senior with a background in construction.  After reviewing many contractors and speaking with some of them, I immediately knew I hit the jackpot when I spoke to Danny.
 
1.  He knew exactly what I needed and wanted done when I first spoke to him.  This entailed the replacement, repair, and installation of the items listed above with attention to quality in materials, prevention of future problems, a fair price, and a commitment to starting and showing up once the job was initiated.  Danny exceeded every expectation in these regards!
2.  I silently knew in advance manufacturers, quality and cost of exterior doors (including the french door), storm doors, door locks and deadbolts, leak-proof door sills for 6 inch exterior walls and a leak-proof barrier on the bottom of the door frames.  Without knowing of my preferences, Danny suggested the identical manufacturers and materials I had in mind.  At this juncture, we met and I hired Danny to perform the work.
3.  I am beyond pleased with the outcome of Danny's effort on this project.  As an example of his integrity, he asked me to trust him in the design and installation of an exterior octagonal window in a bathroom.  My wife and I were literally blown away with a handcrafted symmetrical waterproof tunnel and inside wall frame he created - more akin to an artistic piece than a window.
4. Inside work was always minimally invasive using tarps and soft shoes rather than work boots.  Outside and inside cleanup at the end of each work day was respectfully performed leaving no mess.
I would recommend Danny to anyone requiring any kind of interior or exterior installation, modification, or repair as I have seen firsthand examples of his experience, skills, and personal and business ethics.  In fact, Danny is presently working on costs to replace our roof."

Pala Construction is a construction company that specializes in 3D flooring, roofing, renovation, painting and other similar services that your household needs.\n\nWe work with our partners to streamline project plans that don’t just deliver on product perfection, but also delivers on time – crucial to success in a highly competitive market where every day counts.\n\nOur team offers the most up-to-date, sustainable custom manufacturing solutions. We only source materials from tried and trusted suppliers that meet our exacting standards of quality control.

"Chuck and his team were very professional. Chuck began working on the job immediately and worked on the job on nights and weekends to complete within our time frame. Chuck helped with the colors. House has improved immensely."

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"My experience was fine.  They did the design."

"The technician came within the time frame I was given. He was very professional and respectful of my home."

"Contractor submitted Home Project Proposal. After a slight modification, I agreed to the terms. Mr. Barnes appeared on site on the date agreed upon. He personally measured, cut and installed the drywall, baseboard and garage insulation strip. He painted everything, blending the paint well with the existing drywall. Everything went smoothly overall."