Get matched with top tv mount installation pros in Wendell, MA

Yes, you can mount a TV on a brick wall as a DIY project. This process requires specific tools, such as a masonry drill and masonry bits, as a regular power drill is not sufficient for drilling into dense surfaces like brick. You will need to drill mounting holes directly into the bricks, not the mortar, to ensure there is enough support for the weight of the TV and its bracket. After drilling, use large plastic wall anchors or concrete screws to securely attach the TV mount.

You will be placing holes in the wall to hang the mounting bracket. If you’re mounting a large TV, the bolts in use could make significant holes around half an inch in diameter. Other than a few holes, though, the process of mounting the TV should not cause significant damage to the wall, unless you make an error and miss the wall stud, tearing out drywall. Should you decide to remove the mount later, the DIY drywall repair cost for a small hole usually is $10 to $30. It’s a repair you can do in a few minutes.

Mounting a TV can help prevent some damages from occurring, such as water damage. Installing a new flat-screen TV costs between $160 and $375 on average. A local TV mounting contractor can give you the most accurate price for your area and location of the home that you are looking to mount it.

Do not install a TV above an active fireplace or wood-burning stove because of excess heat and temperature fluctuations. Another place that can be tricky for electronics is the bathroom, where moisture can be a factor. If you choose to mount a TV in these areas, you should find a weather-resistant appliance.