Get matched with top leather and vinyl repair specialists in Southwick, MA

Although it isn’t recommended to use more than 1,500 pounds of force per square inch (or PSI) on delicate siding materials like wood and metal, it’s safe to use more than that on surfaces made of stone, cement, and, yes, vinyl. In most cases, you can use up to 3,500 PSI without any problems, though you’ll want to make sure to use a tip with a spray span that better disperses this pressure, like a green or yellow tip.

Houses naturally settle over time, but they should settle uniformly with no apparent settling in one spot. If your floor is uneven but only in a particular area of your home, differential settlement could be the problem. This can be caused by improper drainage, erosion, expanding soil, earthquake activity, or poor construction techniques.

In general, vinyl flooring resists scratches, dents, and tears, but this can vary from one type of vinyl (and manufacturer) to another. Vinyl flooring has a wear layer that ranges in thickness from 6 to 20 millimeters. This layer offers protection against standard scratches, but vinyl with a thicker wear layer will resist scratches better than those with a thin layer.

As you look for quotes for flooring repair, consider how the severity of the problem and the accessibility of the damage will impact your costs and budget.

Refinishing a few hardwood planks with minor scratches will cost thousands of dollars less than completely replacing an entire water-damaged floor. Likewise, a first-floor structural problem in a house with an unfinished basement is easy to access from below, while a similar issue on a second-story floor will require your flooring pro to remove several layers to get to the damage.