Top-rated floor polishers.

Best floor polishers near Hampden, MA

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Hampden, MA?

Select your specific project to find the pro for you.

Top-Rated Floor polishers in Hampden - Updated Nov 2026

Avatar for Landy Marck Flooring
Landy Marck Flooring
5.0(
1
)
Clean & Polish Flooring - For Business

Serving Hampden, MA and surrounding areas

In business since 2012

Free estimates

Emergency services offered

"I found Marco on home advisor, he was so easy to work with, from start to finish. Professional and reliable and so fair with his prices! I’m very happy with the flooring installed in my bathroom!!"
Response time1 day
Recommended by100%of homeowners
Showing 1-10 of 31
Floor Polishers FAQs, answered by experts

After carpet removal, prepare for new flooring by assessing the subfloor. You will want to address any imperfections to create a smooth and level base for installation. Remember, proper subfloor preparation is crucial for optimal new flooring results. Consider repairing and replacing damaged areas for a stable foundation. For both wood and concrete subfloors, consider sanding to remove any debris or adhesives remaining thoroughly. 

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

You can buff out small scratches or indentations from your hardwood floor, but refinishing is your best bet if you have larger areas that need work. Floors in relatively good shape but have lost their luster can be restored with thorough buffing. If your finish has worn off in areas or if you have sun or water damage, you should go with refinishing instead.

Yes, vinegar and water can strip wax. For a DIY wax stripper, mix about a quarter cup of vinegar with one gallon of warm water. You can also mix one cup of cream of tartar, one cup of white vinegar, and one gallon of water. Before using it on a large area of the floor, you should test it in an inconspicuous place to make sure it works like you want it to.

You can use dish soap mixed with warm water to clean just about any type of flooring, and while vinegar is a great addition to some floor cleaners, it’s not a good idea to use it on wood flooring or engineered wood flooring. Vinegar is very acidic, and it can gradually eat away at the protective finish on wood floors. If you’re cleaning laminate, tile, concrete, or vinyl floors, feel free to use vinegar and water in a 1-to-1 ratio with a few drops of dish soap. For wood floors, substitute the vinegar for olive oil.

The Hampden, MA homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.