Get matched with top sonic cleaning pros in Amherst, MA

You may become so frustrated with the look of moss on your roof that you contemplate whether to clean or replace your roof. Fortunately, you don’t have to go as far as replacing it. After cleaning the moss, you can use a chemical solution to keep it away. For further protection, trim branches that overhang the roof, as fallen seed pods and leaves on the roof allow moisture to collect, encouraging moss growth. Consider adding zinc-coated flashing to the roof, too. As rain washes across the zinc, it leaves zinc particles behind that inhibit moss growth.

Inspections should be conducted annually, and minor repairs should be made as needed.

Tile roofs, including clay, concrete, and slate, are considered low-maintenance materials that require fewer repairs and less care than many other roofing options.

• Clay tiles require minimal maintenance. They stand up well to the elements and UV radiation, repel water, and do not easily stain, discolor, or fade in direct sunlight. Clay tiles do not need sealing. Maintenance is typically only required to replace cracked tiles, which can be caused by foot traffic, extreme weather, or fallen tree limbs.

• Concrete tiles are also low-maintenance but require more upkeep than clay. They need to be sealed every few years to maintain water resistance, and their color tends to fade more quickly than clay.

Aside from these material-specific needs, general maintenance for tile roofs includes annual inspections, routine gutter cleaning, and addressing repairs as they arise. A well-maintained tile roof can provide 50 to 100 years or more of protection for your home.

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.