Get matched with top mailbox repairers in Rosepine, LA

When water penetrates wood, the wood swells, causing the wood and veneer to separate. This separation creates bubbles on the surface of your furniture. If water spills on wood veneer, it needs to be dried ASAP. Surface spills can cause minor damages like white spots and blushing, but if you’re slow to action, you’re looking at more work—and spending—to restore your wood veneer.

Fixing a drawer that is sticky, askew, or broken depends on the specific problem. Start by removing the drawer and examining the slides and tracks for any damage, bent parts, or loose hardware.

For minor issues:

• Clean and Lubricate: If the slides are just sticky, clean them and the corresponding tracks with a hot, damp cloth. Then, apply a lubricant like silicone spray or bar soap to help them glide smoothly. Also, check any roller wheels for problems.

• Tighten Screws: Tighten any loose screws on the slides and tracks. If screw holes are stripped, you may need to fill them and re-drill.

For more significant damage:

• Bent Hardware: If a slide is bent, you may be able to remove it, straighten it out, and reinstall it.

• Broken Parts: If a slide or track is broken or severely damaged, it will need to be replaced. Unscrew the damaged part and install a replacement that matches the type and size of the original.

After performing the repair, reinsert the drawer and test it to ensure it opens and closes smoothly, making any final adjustments for proper alignment. It can also be helpful to consult the manufacturer's guidelines for your specific drawer system.

Yes, you can save moldy wood furniture by removing the mold as soon as you notice it. Mold can penetrate and damage porous wood, though, so waiting to clean it could lead to significant damage. If a large coverage area of mold grows over several months, you may want to ask a professional to try to save the piece. If the damage is bad enough, though, even a pro might not be able to save it.

Wood filler can be used to repair minor scratches, dents, and damages on wood veneer. Simply scrape the wood filler over the chipped or scratched area. Make sure to leave a little bit more than you need so you can sand it down for a smoother finish. Repaint or restrain the surface to ensure a consistent color.