Get matched with top masons in Calhoun, LA

The best tool for drilling into brick or mortar is a rotary hammer drill which is a large hammer drill with low rotation speed and high torque. Regular drills with a hammer function are also excellent tools for drilling into brick when the diameter of the hole is 1/2 inch or less. It might be possible to drill into brick with a standard drill if you’re only drilling a very small hole, but note that masonry work will put a lot of wear on a standard drill, and the tool may not be strong enough to get through brick.

Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.

Costs range from $3,500 to $15,000, depending on material, labor, and design complexity.

Typically, a brick mason will repair a brick mailbox. They can provide an estimate for repairs, which may include sourcing replacement brick, mortar, and other materials. If your brick mailbox has been completely destroyed, you should check with your local building code enforcement office to confirm that a brick mailbox is allowed in your location as some areas do not allow brick mailboxes because of the potential hazard for drivers who may hit them.